13.56mhz high frequency IC integrated only-read module support TTL

タイトルまたは説明

Application:

• Tablet PC
• Lift control
• POS terminal
• Parking system
• Access control
• Handheld terminal
• Attendance application
• Recreational Machine
• Barrier gate/rapid-open gate

 Module NO:

  Module NO.Â	  Interface
OM-HM***-WG	Wiegand*6/*4，5V
OM-HM***-T	TTL，5V
OM-HM***-S	RS**2，5V
OM-HM***-H	USB-HID，5V
OM-HM**1H-WG	Wiegand*6/*4，***2V
OM-HM**1H-S	RS**2，***2V

Parameter:   

Frequency	13.*6MHz
Standard	ISO****3A
Supporting Cards	Mifare s*0/*0，F*8，ultralight，ntagCard
Interface	Wiegand*6/*4, TTL，RS**2，USB-HID
Power Supply	5V，***2V
Card  Reading Distance	0~6cm（Depending on label size）
Current
Operating Temperature	0℃~*5℃
Antenna	built in
Dimension	*5**5*6mm

The IC card reader can set five output format steps:
1. Use IC card to set output format, such as IC card number (called A card): B5 BB *3 FE (opposite to the UID read by NFC mobile phone software, we call it reverse order, and vice versa.)

2. The IC card is not detected within 1 second after power-on, and the setting fails. The card reader output is the card number in the current format.

3. If the IC card is detected within 1 second of power-on, it will enter the setting state (it is better to put the A card in the card reading range of the card reader for power-on). At this time, the LED light will flash continuously (about 5 seconds). Please start setting within this period.

1) Swipe another IC card (called card B) once, and then swipe card A again or wait for 5 seconds. The card reader is successfully set, and the output IC card number is the **-digit decimal reverse sequence: *********2 (8H*0D, take 4 bytes to *0 digits)

2) Brush the B card twice in succession, and set the output card number to *-digit decimal reverse order: *******6 (6H8D, the last 3 bytes are converted to 8 bits)

3) Brush the B card three consecutive times, and set the output card number to *-digit decimal reverse order: *******4 (2H3D4H5D, the second byte turns to 3 bits, and the second byte turns to 5 bits)

4) Brush B card 4 times continuously, and set the output card number to hexadecimal reverse order (8H or *4H): B5 BB *3 FE

5) Brush B card 5 times continuously, and set the output card number to hexadecimal positive sequence (8H or *4H): FE *3 BB B5

4. In the configuration mode, swipe the third IC card (called C card), and the card reader is set to not carry the carriage return.

5. In the configuration mode, swipe the A card again to confirm to exit the configuration
 

国:	China
モデル番号:	OM-HM211-TTL
离岸价格:	7.25 ~ 8.7 / Piece （交渉可能） Get Latest Price
ロケーション:	Guangdong China
最低注文量の価格:	7.25 per Piece
最低注文量:	1 Piece
パッケージの詳細:	-
納期:	3-5days
供給能力:	50000 Piece per Month
支払いタイプ:	T/T, Western Union
製品グループ :	13.56mhz high frequency