1X TO 16X PCI-E PCI E Express

タイトルまたは説明

Notes:
Apply for PCI-E(1X 2X 4X 8X *6X) Rabbet. 
Color from (Socket+ )  might be different as is in the picture, please pay attention with that before place an order.
 
 
 
Product Features: 

Fixable board with 4 holes available on PCI-E *6X side to fix PCI-E *6X connector on motherboard for more convenient management for graphics card.
Thin and fastUSB 3.0 cableavailable to connect PCI-E 1X and PCI-E *6X sides for more free installation and faster data transfer for graphics card.
Molex 4 pin power connectors available for more stable operation for graphics card while mining.
Install PCI-E *6X device to PCI-E 1X slot freely according to dimension and position of motherboard and case.
One end is PCI-E *6X female and another end is PCI-E 1X male.
USB cable length: *0cm.
 
A: graphics power using two FP solid capacitors, the card supply more safety. 
B: transfer cassette port or 4PIN interface strengthen the power supply, so that the graphics power independence from the motherboard, so as to reduce the burden on the graphics card.
C card slot: the original goods into the connector, the graphics card is better.
D:PCI-E connector using multilayer shielding wire, the longest can take 3M without signal attenuation
E: comparison of soft wire, wiring is convenient, want to put it on the card.
F:PCI-E connector plug all gold, more wear and increase conductivity.
G: slot with a fixed buckle, convenient disassembly and fixed graphics card, the card will not fall off from the slot.
 
Attention:
1 The extension line is applicable to the motherboard PCI-E slot (1X 2X 4X 8X *6X). Please use the insert floppy drive power line. Plug PCI-E to extend the line must be computer off the wire and then plug. When in use, must see note!
2 The supporting rod is customized, don't literally get line into. Remember!
3 wire must see clearly the direction, do not insert or insert deflection, prevent burning device, plug line to hold the device and then plug line, to avoid excessive force Reggie socket pin interrupt.
4 small 4PIN head (floppy disk interface) is a standard part, with anti lock buckle, inserted into the middle of a buckle seat after the hook seat, so it is not easy to fall off. When the swap lines must be careful, don't pull line, such as hard to pull the thread or transposons plastic pull out, we can first put line to pull up, namely the first buckling position disengaged from the seat, and then pull out.
5 As suggestion : dual core graphics and the motherboard is *6X also suggest using the old cable!!!