タイトルまたは説明

o 2 in 1 Fountain Solution Features & Benefits o o Use *0 � *5% less Water o Use *0% less Ink o Quicker Drying o Less waste on backing up o Improve press performance & print quality. o Controls linting & piling, extending blanket washing intervals. o Eliminates the need for alcohol o Significantly cuts your VOC emissions. o Prevents corrosion. o Eliminates algae, bacteria and fungus from the fountain system. Application This fountain solution is for Alcohol damping presses and eliminates the need to mix the fountain solution and alcohol together. No pH and conductivity control are necessary. Directions for use When using on presses with automatic dosing of alcohol and fountain solution switch off the fountain doser, then remove the alcohol from the dosing unit and replace it with 2 in 1 fountain solution. Set the alcohol doser to read *0% and recommence running. The fountain solution will then consist of *0% alcohol and 2% fountain solution. The pH reading will be between 5.0 *5.2 and the conductivity reading will be approx **0ms (depending on the water supply). The fount can be decreased as low as 7% if no scumming is apparent OR increased to *5% for excessively hot and humid conditions or jobs with exceptionally large image areas. The pH will be constant and the conductivity will be approx ***0ms but it is of no consequence. The surface tension of the fount solution will be *0 dynes the same as if I.P.A. were in use. For hand mixing where no fount doser is available place 3 litres of 2 in 1 fount into a *5 litre container and fill up with water. Then add the diluted fount to the press. Join our worldwide team of agents and distributors now see xxxxx for more information