3D printer filament ABS 1.75mm 1kg colors By Guangzhou Sanqingda synthesis materials Co., Ltd,

製品仕様

colors:all available colors
diameter :1.75mm

タイトルまたは説明

We are a factory, located in Dongguan, close to Guangzhou. We have over 3 year experience producing PLA&ABS filament for reprap 3D printer. Now, we grow to have over ***0 squal meter site,Â 3 production lines, yield *0 tons each month, we have customers ,resalers and distributor all over the world. We are looking for cooperate partnership and distributorÂ agentÂ all over the world, welcome to inquiry and contact for further more info, thanks.

ABS is commonly used in 3D printing, has the following characteristics:
(1) high strength, good toughness;
(2)density is small, when printing larger volume model lighter, save money;
(3) cost-effective, can be processed in wide range temperature;
(4) softer than PLA;
(5) diameter of 3.0/1.*5mm, variations + /*0.1mm,roundness +/*0.*5mm;
(6) 1 kg /plastic spool packaging, can be automatic feed;
(7) to be applied to a variety of 3D printer, Makerbot, Mendel, Prusa, Huxley, BFB series, etc..

we take CHIMEI ABS as raw materials, some propeties show below :

Property	Unit	Test Method	Test Condition	3DDPLAS ABS
Tensile Strength	kg/cm2 ( MPa)	ASTM D*8 ( ISO7)	*3deg	*0 (2)
Tensile Elongation	%	ASTM D*8 ( ISO7)	*3deg	*0
Flexural Strength	kg/cm2 ( MPa)	ASTM D*0 ( ISO8)	*3deg	*0 (3)
Flexural Modulus	kg/cm2***4 ( MPa)	ASTM D*0 ( ISO8)	*3deg	2.3 (***0)
Izod Impact Strength	kg-cm/cm ( J/m )	ASTM D*6 ( ISO R0 )	*3deg 1/4''	1.0 (*8)
Vicat Softening Temperature	deg	ASTM D**5 (ISO6B)	Annealed *0degÃ—2Hr 1/8''	*5
Heat Deflection Temperature	deg	ASTM D**8 (ISO 5/A)	Annealed *0degÃ—2Hr 1/8''	*8
Melt Flow Index	g/*0 min	ASTM D**8 ( ISO*3 )	*0degÃ—5Kg ( 9N )	5.5
Residual Monomer	ppm max.	Â	Â	**0
Molding Shrinkage	%	FCFC Method	*3deg	0.4~0.6
Specific Gravity	Â	ASTM D*2 ( ISO*3 )	3deg/3deg	1.*4
Flammability	Â	UL**4	FILE NO. E*****3	1/*6" HB NC

we have build our own ABS formulation, tested on over *0 different 3D printer in domestic.Choose the ABS grade that you like on below :

Â	ABS-H	Â ABS-O	ABS-M
Natural color	Milk white	Milk yellow	clear
Market use ABS	our brand,making top	very commond in market	our brand,making top
Processing temperature	*0 deg for 3.0mm & 1.5mm, also good processd at **0 deg for UP!printer	*0 deg for 3mm & 1.5mm	*0 deg 1.5mm &3mm
Odor	low smoke ,tasteless, good for printing in door	white smoke, concentrated flavor ,not good for indoor	Strong smell, not good printing indoor
Roundness	*5%	*5%	*8%
Variety	1.*1.5mm 2.**2.5mm	1.*1.5mm 2.**2.5mm	1.*1.5mm 2.*2.5mm
water/moisture absorption	Very low, no bubbles occur when printing even in bad situation expose to air for over a year	High, exposed to air for a period( like some days or short time,exclusive good indoor environment) trend to occur bubbles when printing	High ,easily absorb moisture, much bubbles when printing after expose to air for a short time
Surface gloss	Normal	Good	Good, much the same like PLA transparent colors
Strength ,hardness,white dot	strong and hard, white dot(don't be afraid it ,even steel will show white lines ,the white ones is materials natural color below surface colors)when bending, 3.0mm worse than 1.*5mm	Strong and tough ,less white dot when bending	tough, some time white dot occur when sharply bending
layer stick to layer	very good	normal,some time layer with layer will break off ,especially take care the black color one. the worst, printed models can be smashed with fingers to scraps.	good
stick to heat bed	normal	normal	good
wrap	some time,make heat bed higher temperature and use 3M blue tape can to reduce wrap	some time,make heat bed higher temperature and use 3M blue tape can to reduce wrap	better than ABS-O
heat bed temperature	> *0 deg, with kapton tape or 3M blue tape	> *0 deg, with kapton tape or 3M blue tape	> *0 deg, with kapton tape or 3M blue tape
dripping and thread within models	almost no dripping, no threads within models	dripping often(worse when get much moisture or higher temperature or put longer),always some threads within models	normal
solubility	corroded by thinner(everywhere buy in some hardware stores,call it PVC tube glue), not good solube at acetone.Also corroded by Limonene	corroded by acetone,corrode the surface burr on model and make it smooth, don't think it will solube ABS like salt or sugar into water! also corrode by thinner	corroded by thinner(everywhere buy in some hardware stores,call it PVC tube glue)

Diameter is stricted controled.
1. two direction diameter laser detect
2. Diameter data which feed back from laser are recorded on computer.
3.Manual measurement of diameter.
Â

国:	China
モデル番号:	SYTABS175
离岸价格:	4 ~ 30 / Kilogram ( Negotiable ) （交渉可能） Get Latest Price
ロケーション:	-
最低注文量の価格:	4 per Kilogram
最低注文量:	24 Kilogram
パッケージの詳細:	vocunm bag
納期:	7 days
供給能力:	10000 Kilogram per Month
支払いタイプ:	PayPal, Western Union, T/T, Other
製品グループ :	ABS filament