3D Printer Filament, ABS 3.00mm

タイトルまたは説明

M-ABS**0XX******2 Series
(ABS, filament material; **0, filament diameter is 3.*0mm; XX, color in short;**0, recommended printing temperature at deg C)
 
e.g.
M-ABS**0MW******2  (Milky White)
Application Facility Kinsuntek KPM Series and other verified printers (FDM)
Material                         ABS plastic (verified by Kinsuntek)
Diameter              3.*0mm，standard tolerance is no more than +/*0.*5mm
Net wet                         1kg/roll
Packaging Type                    roll
Printing Temperature               *70 - **0℃
RecommendedPrinting Temperature   *70℃
RecommendedPrinting Speed        *0 – *0mm/s
Color                          White, Black, Gray, etc (base on stock color)
 
 
KinSunTek ABS Filament is the best and most consistent filament for KinSunTek Desktop 3D Printers with ABS material.


ABS material features
High strength, good toughness, easy to print, and one of the mostly applied polymer plastics in the industry
Strong anti-corrosive capability;
Very good molding effect;
Surface is bright and clean, easy to dyeing and electroplating

Comprehensively quality tested at both ***-micron and ***-micron layer resolutions on the KinSunTek KPM Series to verify that the filament will perform every feature that KinSunTek Desktop Software offer.
If you're new to 3D printing, KinSunTek ABS Filament is also a good material to start with because it's easy to use and performs well on most prints.

KinSunTek ABS Filament adheres well to acrylic and to KinSunTek other printing platform..
Prints with a large bottom layer may have a tendency to curl. To prevent curling, use rafts.

Store KinSunTek ABS Filament in a cool, dry place as it can absorb moisture from the air and lon-term exposure to humidity can compromise filament quality and performances.

Be sure your build plate is lever, clean and oil-free before printing.