Addition cure silicone rubber for making molds

タイトルまたは説明

1. Brief description of Addition cure silicone rubber:

 Addition cure silicone rubber is with the all the advantage of rtv*2 condensation cure silicone rubber, but is also featured with lower shrinkage and low viscosity, good fluidity; Without releasing any by-product with low molecular weight, and it's cured from top to bottom, from the inside and outside simultaneously, so it will be deeply-cured. The E sereise addition cure silicone will not meet the problem of degradation or sticky molds because of the existence of by-product of small molecules under certain conditions, (such as closed, high temperature).it's very suitable for all kinds of mold with a variety of sizes, shapes and large sized plaster, cement,ect molds making.

2. Addition cure silicone rubber applications:

Addition cure silicone rubber is mainly used for metallic arts & crafts, baby nipples, cake, candy food grade products mold making, life casting, medical catheter and so on. 

3. Addition cure silicone rubber features:

a)       Two-component silicone rubber with platinum catalyst

b)       With high transparency, tensile strength, and tear strength.

c)       Nontoxic & reach to Food grade

d)       With good heat stability and weatherability  ( temperature resistant range of **0~**0 C)

e)       With heat-ageing resistance

Any further information pls feel free to contact with Ms Nina