Align Trx 700E DFC Pro Super Helicopter Combo AGNRH70E07A

タイトルまたは説明

Price: $**7
Website: radoti(dot)com

 

3GX Programmable Flybarless System

Operating voltage range:DC 3.5V~8.4V

Operating current consumption: * @********************trong>X and Y axis Operating Angle Range:***0~***0 degrees

Z axis Operating Angle Range: ***0~***0 degrees

Sensor resolution:*2bit

Maximum working voltage: 8.5V

Operating Temperature:**0~*0 degrees

Operating Humidity:0%~*5%

Size:*6.5x*5.2x*5.6 mm

Weight: .*2lbs (0.*8oz)



Align T-Rex **0E DFC

Length:***0mm

Height:**0mm

Width:**8mm

Main Blade Length:**0mm

Main Rotor Diameter:***2mm

Tail Rotor Diameter:**1mm

Motor Drive Gear:*2T

Main Drive Gear:**2T

Autorotation Tail Drive Gear: **4T

Tail Drive Gear: *2T

Drive Gear Ratio: 1: 9.*3: 4.*7

Weight (with Motor):7.*9lbs (*6.7oz)

Align T-Rex **0E Pro Super DFC Helicopter Features:

• New style swash anti-rotation guide with embedded anti-wear material, effectively minimize the wear between swashplate long ball and guide
• Brand new tailblade designed to sustain optimal tail locking performance under high headspeed and extreme flight conditions
• Integrated servo mounts on the main shaft bearing blocks, allowing cyclic servos to be mounted directly onto the bearing blocks, which together with the composite material frame plates, creating a clean and uncluttered look
• Innovative sliding battery tray rails imbedded into the 3K side frames, with patented spring loaded latching mechanism, allowing for quick battery access as well as battery protection
• Motor mount consists of third bearing block to provide motor shaft support, effectively reduce torque induced shifts, and minimize gear striping issue
• Top mounted ESC platform to take advantage of main blades airflow for effective cooling
• **0MX features high efficiency, superior power, excellent torque, low current draw and low temperature; it's capable of maintaining consistent torque and head speed through continuous 3D maneuvers
• High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision
• High precision bearing supported dual push point rudder control design
• Equipped with third bearing main shaft support to increase rigidity, meeting the needs of extreme 3D maneuvers
• New style wrap around airbrushed fiberglass canopy, with aerodynamic form to reduce wind resistance. 4 point anti-vibration mounts for quick install and removal
• Equipped with the low CG DFC rotor head, effectively reduce wind resistance during flight, providing the most direct and precise control feel back to the pilot, and exhibits exhilarating 3D performance and unimaginable flight speed
• Equipped with brand new **0 3G carbon fiber main blades designed specifically for extreme 3D flights, featuring agility and stability, and new graphics paint scheme. The increased blade rigidity improves anti torsion characteristic during flight, and the new airfoil minimizes turbulence near the blade tip, reducing blade noise and power loss
• Brand new CCPM direct servo linkage design to eliminate the weight of double push-pull linkage system, enabling faster and more precise control reaction
• Utilizes composite carbon material integration technique on frame structure for ease of maintenance and high rigidity- Increased front opening area to allow for simpler battery installation
• Top mounted motor base bringing the motor's center of gravity closer to rotating disc, improving 3D agility and allowing blade drafts to cool the motor effectively
• Utilizes high spec MOD1 **2T CNC helical main gear and MOD 1 tail drive helical gear to increase gear mesh area, and minimize gear noise during flight
• New lightweight H-shaped electric device retention system for protection, as well as ergonomically correct design to simplify operation
• Brand new gear box with more streamlined design also allows for simpler disassembly
• High torque rated one way bearing base
• High speed rated thrust bearings incorporated into tail blade grips
• New lightweight landing gears
• New CNC aluminum alloy mounting plate

3GX Programmable Flybarless System Features:

• 3GX is currently the smallest and lightest flybarless system available on the market. Two ports to directly connect Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system
• Illustrated instructions on the computer setup software helps direct the user through a step by step setup process, allowing for quick setups without omitting any steps
• With 3GX's built in Align RCE-G**0 governor function, no external governor is needed to reduce electronic wire clutters
• 3GX utilizes brand new gyroscope sensors of the highest specifications when compared to other flybarless systems currently on the market, allowing it to be used under harsh conditions. Dual axis plus rudder sensor dramatically improves swashplate and rudder correction precision compared to last generation 3G. This is clearly noticeable in stable hover as well as highly aerobatic routines
• The superior vibration resistant characteristic is evident even when mounted with harder double sided mounting tape
• 3GX utilizes *6 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The result is a dramatic stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility
• 3GX's rudder allows consistent rudder feel even under high speed conditions. This excellent control feel will allow pilot of all skill levels to experience the perfect integration between 3GX and helicopter
• Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts
• Based on the 3G FL**0 manual setup process, the 3GX can be setup in just a few minutes through a simple process. In addition, the 3GX can support all of the CCPM swashplate systems currently on the market including *0, **0, **5, and **0 degrees swashplates
• Supports Bluetooth connectivity- With the soon to be released Bluetooth connectivity kit, the 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps allowing live adjustments to 3GX without powering down
• Custom parameters have been opened up in 3GX to allow pilots to fine tune numerous settings for the swashplate and rudder. The settings export feature allows custom settings to be shared amongst friends
• Suitable for helicopters of all class from **0 to **0, glow engine or electric powered.
• With built in pirouette compensation function, the 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips type of maneuvers are easily accomplished with precision
• Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize; hold position as well as altitude, and even autonomous way point flights as well as return home