タイトルまたは説明

The instructions

Spray brush: this product is diluted after seven times directly spray brush in the concrete, plaster, stones, metope ceramic tile, marble, surface interval two hours and then spraying it again, the surface is rough this product can directly spray or brush.

Dipping: this product is diluted after *2 times, immerse fiber board materials, such as brick building materials **3 hours, material itself to achieve the effect of waterproof.

Mixed with cement mortar: this product is six times diluted, and click the cement, sand: waterproof agent liquid = 1:2:0. 3 mixed directly use in direct cement mortar. Before the construction waterproof surface cleaning the required, after being dry, will surface of cracks, with putty or epoxy resin processing, the deal with crack, with waterproof agent in surface directly painted with **2 times, waterproof layer top by incorporating the cement mortar construction method, level with scraping thickness 1.5 *2.0 cm, in level area of over **0 square meters or more, leave the construction method of the expansion, divided into *0 x *0 m block, in dealing with adjustable seam. To have good the external walls of construction, the construction method with spray brush directly handle, not blow the metope of the ash, the mixed with cement mortar construction method, scraping the wipe thickness of 1.5 cm

Mixed with concrete: diluted by ten times the concrete, can be used in the basement waterproof, water tower the cistern waterproof, and construction, slope anti-permeability