E***1A is an analogue scanner card which can be extended by options described below and provides following features: 

• *6 bit analogue interface to scanhead with X and Y channel, ±5V and ±*0V output
• 3x *2 bit additional analogue outputs, 0..5V output
• ILDA-capable interface
• USB 2.0 and **0 Mbit Ethernet connection
• online XY grid correction with support for several correction table file formats (like BeamConstruct HD .bco correction files, SCAPS™ .ucf, Scanlab™ .ctb and .ct5, Raylase™ .gcd, GSI/CTI™ .xml)
• switching between up to *6 grid correction tables during marking process
• *0 microseconds vector cycle time and resolution (microstep period)
• command execution time down to 0,5 microseconds
• realtime processing of laser and scanner signals
• *6 bit internal resolution (for better quality also with *6 bit hardware output)
• can control nearly every laser type
• can control nearly every laser type (this may require extension boards as described below)
• two laser CMOS level digital outputs for usage with YAG, CO2, IPG™, SPI™ and compatible laser types (outputs can provide PWM frequency, Q-Switch, FPK-pulse, continuously running frequency, stand-by frequency), running with frequencies up to *0 MHz
• LP8 8 bit CMOS level parallel digital output e.g. for controlling laser power
• LP8 latch CMOS level digital output for usage with IPG™ and compatible laser types
• Master Oscillator CMOS level digital output for usage with IPG™ and compatible laser types
• 8 bit 0..5V analogue output e.g. for controlling laser power
• 8 digital s and 8 digital outputs can be switched to opto-insulated mode with external power supply of up to *4 V
• 2 s can be used for *0 degree phase-shifted encoder signal for marking on-the-fly applications
• **2 MByte DDR3 RAM
• 1 GHz CPU clock
• support for Micro-SD and Micro-SDHC cards
• internal command and vector data list with more than *0 million entries
• continuous list concept, no need to swap between buffers
• BeamConstruct PRO license included
• open source compatibility library that emulates existing programming interface for fast and easy usage with existing software (contains e.g. Scanlab™ RTC4™, SCAPS™ USC™/SCI and other compatible interfaces)
• very small size of about *7 mm x *5 mm
• shipped with easy to use connection kit
• hardware/firmware is quality made in EU/Germany