Heavy Duty Drawer Rack L888D800H2000mm (MR-001-UI) for Storing Moulds or Tools Storage

离岸价格

Get Latest Price

0.9 ~ 1.4 / Kilogram ( Negotiable )

5 Set Minimum Order

国:

China

モデル番号:

离岸价格:

0.9 ~ 1.4 / Kilogram ( Negotiable )（交渉可能） Get Latest Price

ロケーション:

最低注文量の価格:

0.9 per Kilogram

最低注文量:

5 Set

パッケージの詳細:

standard export package

納期:

15-20days

供給能力:

200 per Month

支払いタイプ:

L/C, T/T

製品グループ :

Mold Rack

今すぐお問い合わせください

Jiangsu Unisource Industrial Co., Ltd.

China

1333 信任点

連絡先担当者 Zhu

Nanjing, Jiangsu

今すぐお問い合わせください

製品仕様

Surface treatment:powder coating
Color:Blue, Orange, Yellow, Green or RAL color

タイトルまたは説明

Heavy Duty Drawer Rack L**8*D**0*H***0mm (MR****-UI) for Storing Moulds or Tools Storage

Drawer mold rack is mainly used for storage of all kinds ofmold, which could be assembled with manual movable carriage on the top so as to easily take and retrieve the goods. The side rack was equipped with idler wheel rail on the bottom and the sliding shelf panel could be freely pulled out when loading. The middle type slide rack could carry less than **0KG/Layer, The entire drawer mold rack is section combination structure, which is convenient for transport, and the assembly is simple and fast and this rack possesses better safety protection device. Special drawer type mold rack can be ordered.

Quick Specification

Item number	Drawer mold rack, Slide rack, Tooling rack
Material	Q**5 cold rolledsteel
shelf	Draw-able, can be half open or widely open
Standard size	L*8D60H***0mm can customized any size
Level & Loading Capacity	4 levels + top levelThe top level is fixed and its loading capacity is equal to or bigger than0kg.The lowerfour levels can be drawn out0mm and can load as much as8*0kg.
Drawer mold rack using	Injection molds and dies storage
Surface treatment	Powder coated
color	Green or as your like
upright post	00MM square tube, #*0 channel steel
upright post spacer	2.0MM cold roll steel
Drawer material	2.0MM cold roll steel
accessoires	overhead travelling crane and chain block

Note:The lowerfour levels can only be drawn out one by one.(when first level is drawn out. The second and third level can not be drawn out. Automatic safety interlock system for only one shelf extending at a time comes standard.

Advantages:Slide rack is widely used in work plants of machinery industries. To work with crane will enhance the work efficiency. For tools are often very heavy and small in size, so the draw-out design makes tools easier be taken out. So it makes access work convenient.

Deatails:

Mould rack is composed of uprigt frame, steel decing, support structure, self locking devices etc,

The support structure is the secondary design, the loading capacity of the single drawer is generally within ***0KG.

The drawer deking can be designed to the semi-open.It is suitable for storing moulds etc, the crane, forklift, self-made trolley can be used for picking up goods.The particular slideway design makes the small using resistance, and the self-locking device can be reliabl, and safe.,Each drawer can be drawn out *0% of its depth.

Features:

1.More mouldules can be added by being bolted together;

2.Easy operation: Roll-out shelving provides easy and safe access to injection molds and dies. Shelves are adjustable on *0mm centers to adjust your inventory of molds.;

3.Save space and cover less area, 3*4 standards shelf can be deposited with dozens dies;

4.Simple structure: composed by a variety of components, easy for transport and assembly;

5.Reinforced rack tops provide an economical way to store your heaviest tools with rack top capacities up 4 tons or more;

6.Three uprights frame structure ensure **0% shelf extension;

Our Services

Our Promise as below: ( ^_^ )

1. Material is steel Q**5, high-quality steel from Shanghai Bao Steel Corporation , the top 5 steel manufacturer in China;

2. Samples could be supplied for you in ***5 days;

3. Products could be customized as your request;

4. Warranty is2 years if not artificial reasons!

5. Matters not mentioned herein could be discussed!

Guarantee ofJiangsu Unisource Industrial Co., Ltd.:
3~*0 years warranty in case that
A) Proper handling during operation, correctly forklift handling while stacking/un-stacking
B) Overloading is prohibited
C) Environment request indoor, dry and not humid circumstance, do not contact with any corrosive chemical material (for zinc plated and powder coated products, no limitation for hot dip galvanized)
D)We will take full responsibility for any manufacturing defect is identified after arrival, would either refund or reship good products to you.

Kindly inform us the info. as below:
- Drawing (if available) of rack; if not, we can offer CAD design service for you
- Size of your warehouse (Length x Width x Clear height)
- Storage requirement on the cargo(temperature etc)
- Size (W*D*H) & weight of pallet (after loading)
- How many pallets each layer you would like
- How many layers you would like
-Parameter of your forklift ( to decide the width of aisle between racking).
-The color you want

Contact:
Jasmine (I'm a lovely girl !)
Tel: (**6) *5 6******0
Fax:(**6) *5 *******3
Phone:(**6) **********1
Skype:Jasmine_racking
Mail:jasmine (at)unisource-cn (dot) com
Our company is flexible and we can adapt to your design.
Please feel free to contact me for storage equipment any time.
We can quote you upon request, and will reply you within *4 hrs.

国:	China
モデル番号:	-
离岸价格:	0.9 ~ 1.4 / Kilogram ( Negotiable ) （交渉可能） Get Latest Price
ロケーション:	-
最低注文量の価格:	0.9 per Kilogram
最低注文量:	5 Set
パッケージの詳細:	standard export package
納期:	15-20days
供給能力:	200 per Month
支払いタイプ:	L/C, T/T
製品グループ :	Mold Rack

Heavy Duty Drawer Rack L888*D800*H2000mm (MR-001-UI) for Storing Moulds or Tools Storage

Heavy Duty Drawer Rack L888D800H2000mm (MR-001-UI) for Storing Moulds or Tools Storage

Jiangsu Unisource Industrial Co., Ltd.

製品仕様

タイトルまたは説明

関連製品 Jiangsu Unisource Industrial Co., Ltd.

Send a direct inquiry to this supplier

To:

私は知りたい:

Heavy Duty Drawer Rack L888*D800*H2000mm (MR-001-UI) for Storing Moulds or Tools Storage

Jiangsu Unisource Industrial Co., Ltd.

製品仕様

タイトルまたは説明

関連製品 Jiangsu Unisource Industrial Co., Ltd.

関連製品

Medium Duty Warehouse Rack

Send a direct inquiry to this supplier

To:

私は知りたい:

Get Verified Buyers & Suppliers

Avail Free Consultation

Heavy Duty Drawer Rack L888D800H2000mm (MR-001-UI) for Storing Moulds or Tools Storage