タイトルまたは説明

Features :
- HPI *****9 Baja 5B V2.0 RC Gas Off-Road Buggy RTR w/2.4 Radio
- Chassis: Narrow channel monocoque design 0.*6" (4mm) thick, gunmetal anodized, constructed of aircraft grade ***1 T6 aluminum, nylon plastic skid plates front and rear
- Drive: Rear wheel gear drive
- Engine: 2 cycle 1.*0 cu in (*3cc) gasoline with pull starter, updated cylinder that provides *0% more power than original version dual element foam air filter, primer, choke and kill switch. Now equipped with Torx T*7 screws for less wear on tools and screws
- Exhaust: Steel High Flow design with much larger capacity than original
- Radio: 2.4GHz Spread Spectrum DSSS with failsafe function that prevents low voltage runaways, steering dual rate, servo reversing switches and flashing LED low battery warning
- Servos: Water resistant with high torque *5kg-cm steering servo
- Radio Box: Sealed, rubber plugs provide access, no need to unscrew entire box
- Receiver Battery: ***0mAh, five sub C-cells 6V rechargeable pack with standard connector
- Clutch: Automatic centrifugal type, ***0 RPM for quick acceleration
- Fuel Tank: *4oz (**0cc)
- Ball Bearings: Full set included
- Shocks: Four VVC/HD oil-filled, aluminum body, five externally adjustable dampening settings and dual rate springs for progressive dampening action on all surfaces Main Gear: *7 tooth
- Gearbox: Sealed
- Differentials: Viscous Torque Control can be tuned using different weight diff oils, hardened metal planetary gears
- Brakes: Ventilated dual disc
- Front Tires: HPI Dirt Buster Rib Pattern M compound 2.4" (*0mm) wide 6.7" (**0mm) outer diameter
- Rear Tires: HPI Dirt Buster Block Pattern S compound 3.1" (*0mm) wide, 6.7" (**0mm) outer diameter
- Wheels: *-spoke, nylon *-piece bead lock, bead is bolted to wheel to hold tire securely in place-no need for tire glue
- Body: 0.*8" (2mm) thick polycarbonate pre-painted in either gray, red or blue (see COMMENTS below) with decals applied
- Rear Wing: Adjustable, molded black plastic with decals applied
- Roll Cage: Baja style high impact nylon protects engine and body from crash damage
- Suspension: Fully adjustable, long travel double wishbone
- Caster: Adjustable, with shim *2 / *5.5* stock / *9 degrees caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
- Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
- Warranty: *-year limited through manufacturer beginning at date of purchase

Specifications :
- Vehicle-
- Length: *2.2" (**7mm)
- Front Width: *8.1" (**0mm)
- Rear Width: *8.9" (**0mm)
- Height: *0" (**5mm) with 1G, *1" (**0mm) with 0G
- Ride Height: 3" (*6mm)
- Suspension Travel: Front 3.7" (*5mm), Rear 3.9" (**0mm)
- Weight: *1.3 lbs (9.6kg)(approx.)
- Wheelbase: *2.4" (**0mm) wheels on-center front-to-rear
- Front Tread: *5.0" (**2mm)
- Rear Tread: *5.8" (**2mm) wheels on-center side-to-side
- Front Track: *7.4" (**2mm)
- Rear Track: *8.1" (**0mm) outer edges of wheels
- Gear Ratio: 8.**2:1
- Tires- Front: 2.4" (*0mm) x 6.7" (**0mm)
- Rear: 3.1" (*0mm) x 6.7" (**0mm)
- Body-
- Length: *2.9" (**1mm)
- Width: 8.8" (**4mm) at rear wheels (widest point) 3.*5" (*2mm) ahead of front wheels (thinnest point)
- Height: 4.*5" (**1mm) at highest point.

MOQ Price : USD**8.*5 (NEGO)