
805 Alpha Drive,Richardson,Texas,USA
~~POLYMAGIC LED Glass --Q&A--
Q: What is the maximum glass size?
A: It can be up to as large as 63 x 157.5 (1600 mm x 4000
mm).
Q: What is the maximum film size?
A: LED film can be up to 63 x 394 (1600 mm x 10000 mm).
Q: What is the thickness of the glass?
A: It ranges from 1/4 or 6.3 mm (2 mm + 2 mm) to 1-9/16 or
40.3 mm (19 mm + 19 mm).
Q: What are the various glass types?
A: Annealed, tempered, low-iron glass, tinted-color,
reflective, curved, mirrored, insulating glass.
Q: What are the available LED colors?
A: White, blue, green, red, and whitish-yellow (warm
white).
Q: Is R-G-B available with POLYMAGIC™?
A: Yes, but the R-G-B is laminated with a combination of 4
panels so the glass would be very thick. Alternatively, one can use
PolyDigit™ to satisfy the R-G-B requirement.
Q: What is the operational voltage?
A: The power is 110 240 VAC, which if converted to DC is
6V 48 V, depending on the design.
Q: What is the power consumption per LED?
A: Each LED requires approximately 0.06 Watts (i = 10 mA, V =
6 VDC; P = iV = (0.01)(6) = 0.06 W).
Q: Can multiple glass panels be connected together?
A: Yes.
Q: What are the advantages of LEDs?
A: The benefits of adopting LED lights are safety and energy
efficiency, not to mention the savings on maintenance costs and
operation. LEDs can last for over 10 years, and they use 90% less
power than the conventional incandescent lights. LEDs require
minimal maintenance and can continuously produce lights that are
uniform in color and brightness.
Q: Are there any wires in the glass?
A: Yes, but they are not readily visible and will not be
aesthetically obtrusive.
Q: Where are the busbar and wires used to power the LEDs
located?
A: Normally, the busbar and wires are located both on either
the long sides or the short sides of the glass or it can be on a
single side depending on the design.
Q: What is the environmental operating temperature
range?
A: 20oC to 80oC (4oF to 176oF).
Q: Can the LED glass be sold without the power supply?
A: No, because every POLYMAGIC LED Glass needs the correct
voltage and current in order to operate. The power supply needs to
have the proper certification (ex. UL, CE) so that it will not
damage the POLYMAGIC Glass.
Q: Can the POLYMAGIC LED Glass be sold separately and be
compatible with the customers software and other
specifications?
A: Yes, the details need to be discussed with Polytronix once
the design is in place. However, it is highly recommended that the
software and controller from Polytronix be used.
Q: Can R Rated Curved Glass be produced?
A: Provide us with design drawings for confirmation first.
Typically, it can be made with a curved R-height less than 450
mm.
Q: Is the technology patented?
A: Yes.
Q: What is the normal lead time?
A: 4 weeks.
Q: What is the cost?
A: It depends on the design, the glass type, and the number of
LEDs.
Q: What is the lifetime of the POLYMAGIC LED Glass?
A: 10 years or more.
Q: What is the warranty?
A: 1 year.
Q: Are there any design charges for the logos or
patterns?
A: Yes, depending on the design.
Q: What are some applications of the POLYMAGIC LED Glass?
A: Lightings, bath room/shower enclosures, clinics, conference
room tables/benches, hospitals (emergency, ICU, operation room),
hurricane-resistant windows, inner doors/shop windows, façades,
residential shelf skylights, roof lights, cosmetic specialty
counters, shops/boutiques, clocks, electronic products, and
more.
Q: What are some of the unique features of the POLYMAGIC
LED Glass?
A: Glass sizes can be made quite large, thus meeting the
requirements of even the most extreme projects. LEDs are very
bright and shine on both sides not just on only one side. The LED
glass can be curved and laminated with different types of glass. It
can also be used in mirrors. It provides up to 99% UV and 40% IR
protection. It can serve as a safety glass covering (like the front
glass in automobiles). It can be used in combination with
Polytronixs other unique glass types.
Q: How much would the glass weigh?
A: For a 12 mm (7/16) thick glass, it would weigh 7.0 lbs. or
3.2 kg per square foot.
Q: Can the cables support the glass?
A: There are wire attachments to the glass. Those wires cannot
handle the stress, which means you cannot pull on the wires to move
it or use it to hang the glass. For mounting purposes, you will
need to utilize a frame or allow us to drill holes into the
glass.
Q: Are the cables able to provide power to the lights from
the transformer/power supply?
A: No, the wires provide power to the lights not cables.
Q: Are the LED lights visible from both sides of the
glass?
A: Yes, there will be a sticker noting the front side or back
side on the glass.
Q: Is the brightness equally represented on both sides of
the glass?
A: No, the front side will be about 15% brighter than the back
side.
Q: What type of shop drawings do you need in order to
proceed?
A: Any dimensional drawings from any software showing the
locations of the LEDs would suffice. However, we prefer
AutoCAD.
Q: What is the maximum number of LEDs that can be
placed?
A: It depends on the design and function of the glass.
Q: What is the minimum pitch of the LEDs?
A: It depends on the glass size, busbar location, the
quantity, and location of the LEDs.
Q: What is the lumen level of the LED?
A: Typically, white 1000 mcd; warm white 1000 mcd; red 180
mcd; green 600 mcd; blue 200 mcd, which are approximately 1 7
lumens (white/warm white are 6 7 lumens).
Q: What is the thickness of the POLYMAGIC LED Glass
consisting of 5 mm glass + 2.5 mm PVB + 5 mm glass?
A: Total glass thickness 10 + 2.3 mm = 12.5 mm.
Q: What is the percent transmission (i.e. the transparency)
of the glass?
A: A POLYMAGIC LED Glass with a 12.5 mm thickness has VLT of
80%.
Q: Is the use of a UV film recommended in order to protect
the LEDs that are exposed to direct sunlight indoors?
A: No, the POLYMAGIC™ Glass is already equipped with UV
protection.
Q: Is there a water condensation issue?
A: We laminate all materials inside the glass with full a
cover interlayer. The wires are also laminated inside the glass; IP
can be 65.
連絡先担当者:Mr. Sang
会社:Polytronix, Inc.
住所:805 Alpha Drive, Richardson, Texas, USA,75081
電話:
電話番号を表示
ファックス:
ファックス番号を表示する