Second, its
biodegradable, which means it will break down in a landfill. Third,
its clear in color, which makes for gorgeous crystalline prints
that absolutely scream for LEDs. Last but not least, it has an
extremely low shrinkage factor, which means it resists warping,
even at very large print sizes.
ABS is an widely used engineering plastic, hard, good impact
strength, resistant high temperature.
This PLA ABS 1.75mm Sunya filament comes as a 1kg spool
or 2.5kg coil, 3.0mm comes as 2.5kg spool or 2.5kg coil, in a
sealed package with desiccant.
1KG = 2.204 lbs,2.5kg=5.51lbs.
Nominal Diameter: 1.68-1.73mm, 2.9mm +- 0.1mm
Colors:
Natural,Red,Green,Blue,Yellow,Purple,Pink,Grey,Silver,Gold,White,Black
Extrusion temperature: PLA 180-210
deg, ABS 210-240deg(2
)materialstiffness,printout themodel ofgood hardness,strength,durabilityas astructural
element,the structureis often usedDIY 3Dprinter structureparts,such asMendel, Prusa, etc.;
(3) melting point lower than ABS, flow rapidly, not blocking the
nozzle;
(4) PLA is transparent material, the effect of color make it
bright, shiny;
(5) Our filaments through toughness of PLA to strengthen, not
easily broken when bent, need to be repeated several times before
bending off to facilitate the printing operation;
(6)dimensional stability, 3mm and 1.75mm standard parts tolerance
is ± 0.1mm;
(7) manufacturers supply according to customers' requirements
color, affordable, adequate inventory, rich colors (natural, white,
green, yellow, red, blue, orange, purple, silver, gold, etc.);
(8) use of ABS plastic spool packaging, each roll is 2.5 kg or 1.5
kg, facilitate the automatic rotation when printing, PE bag
package, containing desiccant.