The thermal-transmission bright fixation By Shenyang Blueairmingchuang digital technology co., ltd.,

The thermal-transmission bright fixation

离岸价格

Get Latest Price

3500 ~ 3900 USD / Set

1 Set Minimum Order

国:

China

モデル番号:

GU1900

离岸价格:

3500 ~ 3900 USD / Set （交渉可能） Get Latest Price

ロケーション:

Shenyang Blueairmingchuang digital technology co.,

最低注文量の価格:

3500 per Set

最低注文量:

1 Set

パッケージの詳細:

Exported fumigation free material

納期:

3 ~ 7 working days

供給能力:

50 Set per Month

支払いタイプ:

D/P

製品グループ :

製品仕様

Brand Name: blueair
Plate Type: The thermal-transmission bright fixation
Usage: The thermal-transmission
Color & Page: Multicolor
Automatic Grade: Automatic
Condition: New
Dimensions(L*W*H): 2730mmÃ—970mmÃ—1030mm
Gross Power: â‰ˆ4600Wï¼Œ220V

Bright purification in one:loading and unloading of decomposition

タイトルまたは説明

Owns two national patents the thermal-transmission bright fixation.
1.On the fabric medium principle diagram as follows:

One Two
The working principle of machine is figure one;
Single principle is figure two.

The machine features:

2.1  Bright fixation cheaning machine;
2.2  Natural swing type tension roller unrolling and rolling.
2.3  Can be single complete inkjet printer spray finishing unheated light work and can be used in conjunction with the inkjet printer;
2.4  Used in conjunction with the photo printing machine,speed can be *2ï½ž*0 square meters.
2.5  Work with the single machine speed can be faster;
2.6  Detachable split package;
2.7  The thermal-transmission bright fixarion GU***0 and GU***0;
2.8  Inkjet printer printing width of 1.6Mï½ž1.9M can be installed GU***0;

Operation steps:

3.1  Install the power line ground wire and the provided;
3.2  Start the main power switch;
3.3  The heating switch,adjust and set the temperature control table shows the heating medium heating temperature,when the temperature control table shows the temperature reaches the preset temperature,and then start the fan purifying switch;
3.4  Purification activated switch,temperature is maintained at a preset temperature,start unreeling switch will switch to the left(clockwise)position and start winding switch,at the same time inkjet printer can begin to work;
3.5  Pull switch is not started,the switch is a natural pull guide roller switch,the total power switch starts with natural tension roller natural to start work;
3.6  Heat drying fabric finish baking work after the winding switch is closed,the unreeling the switch to the right(inversion)position,make the roll to roll the remaining motor reversal fabric wrapped around back to the tape guide roller guide roller,to prepare for the next work;
3.7  The remaining fabric wrapped around after the roll switch to the middle(stop)position;
3.8  The fan purifying switch off,at the same time,temperature control meter adjusting temperature was set at **0â„ƒ;
3.9  When the temperature reaches the set temperature of **0â„ƒ,keep *0ï½ž*5 minutes after opening fan purifying switch,the biggest fan air volume,*5ï½ž*0 minutes later,the heating temperature control table is adjusted to the first when the temperature settings,close the heating switch and then,*0 minutes after the closure of fan purifying switch;
3.*0 Turn off the power switch;
3.*1 The control switch power line off the power;
3.*2 Maintenance free:When the body temperature or line with the environmental temperature,the heat oven,open,with a rag to wipe clean the inner wall heat oven residual oil,and then hot oven Nagato shut,to prepare for the next use;
Objective:In order to use in the next time process inside the body does not have oil falling off in the heat drying fabric,affecting the quality of products and related fabrics and other materials of the invisible waste;

Matters needing attention;

4.1 Machine failure needs repair,must the emergency stop is pressed,cut off the power before repair!
4.2 Equipment in use process,banned the use of oven,open,to avoid excessive heat to burn on the limb;

国:	China
モデル番号:	GU1900
离岸价格:	3500 ~ 3900 / Set （交渉可能） Get Latest Price
ロケーション:	Shenyang Blueairmingchuang digital technology co.,
最低注文量の価格:	3500 per Set
最低注文量:	1 Set
パッケージの詳細:	Exported fumigation free material
納期:	3 ~ 7 working days
供給能力:	50 Set per Month
支払いタイプ:	D/P
製品グループ :	-