WHITE HOT-MELT ROAD MARKING PAINT

RAW MATERIAL COMPOSITION

Titanium oxide, Binder, Calcium Carbonate, Petroleum resin. 

Additives: Glass beads, EVA, Quartz sand.

TECHNICAL SPECIFICATION

Relative density: 1.8-2.3

Softening point 90-140 degrees C.

Nonsticky tire time (min) <3 

Compressive strength Mpa <12

Glass bead content is 30%.

Heating stability ~4 hours in stirring state at 200~220 C, without obvious yellowing, coking, caking and other phenomena. 

No wrinkles, spots, bubbles, cracks, shedding or stickiness after coating colour and appearance drying.

Life span: 3-5years 

PRODUCTION & TESTING STANDARDS OF HOT MELT COATINGS

China Standard JT/T 280-2004

Japanese Standard JISK5665

British Standards

Australian Standard 

American Standard

DOSAGE OF HOT MELT COATING

Theoretical value 240㎡/ton

PACKAGING OF HOT MELT COATING

Plastic woven bag with plastic film 25Kg/bag 

or 

Kraft paper bag 25Kg/bag

ACCESSORIES FOR HOT MELT COATING

Special primer: Select special primer for hot-melt marking paint to increase the adhesion between pavement and paint and product strength. 

Glass beads: Special glass beads for marking surface sowing are selected, with clear and transparent colour and refractive index greater than 1.5.

SUPPORTING CONSTRUCTION MACHINERY

This product is suitable for use with conventional heat-soluble road marking paint construction machinery, such as Hot-Melt Kettle, Scriber and base oil sprayer.

STORAGE

Hot-melt marking coatings are not suitable for long-term storage.