Lafe Chemical Industrial Group Co.,Ltd

Product Description: Size: EXTRA LH, LH, LQ, LP, LAH, LAQ, LAP. Type: China Variety. Specification:

Appearance of TCCA *0% White Granules: ***0mesh ****0mesh (or made in accord with client&#*9;s requirements

polyether polyols ppg EP****0 1.Application: EP****0 is macromolecule , highly-active polyether, it can

Grade ChemicalComposition% Al impuriti

Item Standard of Analysis Result of Analysis Appearance White or light yellow

PVC RESIN SG3, SG5, SG7 Polyvinyl Chloride Resin SG3 SG5

1. High quality&competitive price. 2. Film grade, Blow grade, Injection grade 3. Virgin or Recycle Granule

2. CAS No.: ********2 3. Appearance: Slab, Granular 4. Grade: Semi&Fully-refined Melting point: ****0 C

Product description: Hot pressing single layer and double layer car floor mats Material Le

e are the professional HDPE supplier, and our HDPE is with best quality and competive price. Used for making

aluminum scrap ***3 Si : 0.**0.6% Fe : 0.*5% Cu : 0.1% Mn :0.1% Mg : 0.***0

ProductsName:PureAluminumIngot*9.9% ChemicalComposition:al Weight:*0/*5kg

we provide this product in high quality and low price. Product Name PVA, PVA Resin, Pol

Chlorhexidine Gluconate USP/BP/EP *0% Index Standard Test

EPOXY seriesis BPA-type solid epoxy resin, Its molecular weight: between ****2, **0; Solid state in room tempe

Details Test item Specification Reagent grade

Grading Superior Grade First Grade Qualified

Specification Item ...

we provide this product in high quality and low price. Product Name PVA, PVA Resin, Pol

Specifications dap and urea fertilizer 1.Nitrogen: *6.0% Min 2.Biuret: 1.0% Max 3.Moisture: 0.5% Max 4.

polyether polyol***0s Item Index Hydroxyl value (mgKOH

Epoxy Resin E**0 1.Usage: Couldbeusedtomanufacturemanykindsofcoatings, suchaspowdercoatings, ...

Parameter Grade

pecification 1 Length *2 cm up. 2 Moisture *6% max, dry enough for lo

Kabuli Chickpeas ****6 / ****4 / ****2 / ****0 / ****8 count per oz moisture : ****2% maximum total d

Composing Flake/Pearl/Solid*9% Flake/Pearl/Solid*8% Fl

Moisture:Max 6 % Purity:Around *9.*0 % Broken almond:Max5 % Bad almond of obscure:5% Aflatoxins:Max 5PPB

Blowing molding Grade Blowing molding Grade HDPE Item Test Condition Test Method V

Epoxy Resin Liquid Liquid Epoxy Resin 1.Introduction Epoxy resin is A kind of widely used general liqui

1. High quality&competitive price. 2. Film grade, Blow grade, Injection grade 3. Virgin or Recycle Granule

Type:Long / short Size:6.0mm, 6.5mm, 7.0mm, 7.5mm, 8.0mm, 8.5mm, 9mm, 9.5mm, *0mm, *0.5mm, *1mm, *1.5mm Mois

Specifications 1.Product:Al Ingot 2.Width: *******0 (mm) 3.Length: *******0 (mm) 4.Weight: *5kg 5.Al (

Polypropylene, as thermoplastic polymer, is widely used in plastic field. Due to different catalyst and polyme

High density polyethylene is non-toxic, tasteless, odourless, white particles, melting point is **0 C, the re

Base Oil Virgin/Recycled Base Oil SN**0 Base Oil SN**0 Base Oil SN**0 SN **0 is a base oil at the upper

LDPEInjectionGrade Tests Value Unit Melt

HDPECharacter: HDPEhastheverygoodperformance, especiallytheinsulationdielectricstrengthishigh, so&n...

pecifications 1.copperwirescrap*9.*9 2.wirefromcoppercables 3. clean, red, *9.9% 4. SGS/CIQ/BV..

Details Test item Specification Reagent grade

Rubber Process Oil ( Aromatic )Grade 1 Characteristics RPO Tes