Sell Bag Making Machine

Description

Performance and Characteristics 1. This machine uses fully automatic servo motor with computer digital function to control length, it is easy for operation. The produced one is very tight and fast at the seals, it apparently shows a good quality. 2. Flow process of production is from rolled material through automatic edge alignment, edge trimming, strip piercing, laminating, ultrasonic compressive embossing, photo cell sensing, hole punching, thermo cutting off and ends with automatic counting, all of the operations are fully automatic. 3. This machine equips automatic stop equipment, it will work to stop the machine when it is running out of material supply or when photo cell is out of order or when temperature is losing down and below the minimum required. Main Technical Parameter Machine model: TPM***0/TPM***0 Material: LDPE-PP-PPE Capacity: *0~**0 (Cycle/min) Cutting width: **0~**0 mm/**0~**0 mm Cutting length: **0~**0 mm/**0~**0 mm Thickness of film: 0.*4~0.*5 mm Film annulus diameter: φ**0×***0 mm/φ**0×***0 mm Step motor: 1kw Transducer motor: 1.5kw/2.2kw Heater: 3kw/3.5kw Food-out motor: 0.*5kw /0.*7kw Ultrasonic: 1set Conveying electrical: 0.*5kw/0.*5kw Food film motor: 0.*5kw/0.*5kw Sealing capacity: ****0m/min Cooling: 0.*7kw Power: *5kw/*7kw Overall dimension (L×W×H) mm: ***0×***0×***0/***0×***0×***0 Voltage: *0Hz **0v Press empty machine: ***0×***0×***0/***0×***0×***0 Packing dimension(L×W×H)mm: ***0×***0×***0/***0×***0×***0