Dehumidifier

Description

KNDD Series Honeycomb Type Dehumidifier Main application: At present, engineering plastics such as Nylon, PC, PET are widely used in plastic processing and its strong hygroscopicity that are proved to involve in the weather, can not be reduced effectively by the traditional heated air drying system. Before molding, it must adopt the high stability low dew point dry wind (at least **2℃) and appropriate dry temperature to realize its moisture content below 0.*2%. In this condition, the formed plastics can show its best physical property and perfect. The efficient dehumidifying-drying machine for its closed cycle system and below **0℃low dew point dry wind can make the plastics release the moisture rapidly to the dry wind and can avoid the formed ones from shrinking crazing or dent. Featuresï&frac*4;š 1. High performance with Japanese Nichias honeycomb rotating wheel for dehumidification 2. Ability to get the ultra low temperature (low dew point) air 3. Easy to absorb the moisture in the hot air (Different from the other adsorbents, its adsorptive capacity can be well at **0℃). 4. Ability to absorb moisture of low temperature air (Low temperature air, such as high pressure air, the good moisture absorbance can make the ultra low temperature air.) 5. Easy maintenance 6. Ability to wash in the water .It can be used again after wash to remove the gray scale.