Description

The WT ***0 GSM Terminal is the wireless communicator for alarm and fire panels that uses the GSM network to transmit alarms signal. The GSM Terminal checks the status for the PSTN line and in case the PSTN line becomes unavailable, the alarm panel will dial out using the GSM cell phone network to communicate with the alarm receiver center at the monitoring station and transmit the alarms FEATURES 1. Panel compatibility - Allows any contact ID alarm panel to transmit alarms over GSM network. 2. Works over the GSM cell phone networks. Units can be used wherever there is cell phone coverage 3. Telephone line backup: WT ***0 give priority to the lowest cost network. WT ***0 uses the telephone line as the main transmission line and uses the GSM voice channel as backup. 4. Provide 3 inputs / 3 outputs SMS function. Any short circuit impulse, it will send out the SMS from the different zone. 5. SMS contents are able to change to any languages. 6. Low power consumption - uses *0mA while in idle state and **0mA when transmitting an alarm 7. Wall mounting enclosure available: The WT ***0 units can be installed inside the alarm panel or inside its own wall mount enclosure 8. Available in **0/**0/***0/***0mhz frequency