SILANE CROSSLINKABLE HDPE

Description

[SPECIFICATION]XL*5/*5B ï&frac*4;ŒSilane crosslinkable HDPE, it can crosslink in warm water and is divided into material A and B. When processing, we mix A with B and extrude them into pipe. It’s main advantages are as following:xxxxx machinery xxxxx processing quality3.long producing cycle[MODEL AND USE]1. XL*5A/*5B speciality material for PEXb use 2. XL *5A/*5B-W speciality material for PEXb-AL-PEXb use [PROCESSING ]1. Processing temperature is between **0℃—**0℃ 2. Material “B” must be under dry condition to make sure of the smooth surface. 3. The extruded pipe can be crosslinked fully in the warm water of *0℃ for **8 hours, the immersing time is differed by the thickness of pipe’s wall [BASIC PERFORMANCE] Performance Test Method Unit Result Density GB/T********6 g/cm3 0.***7 Melt Index (5/**0) GB/T********0 G/*0min 1.1 Tensile Strength GB/T********2 Mpa *2.1 Elongation at break GB/T********2 % **1 Flexural Strength GB/T********0 Mpa *3.7 Flexural Modulus GB/T********0 Mpa **8 Below *0℃ low temperature impact performance GB/T********5 / success Crossinglinking degree GB/T*********1 % *9