Description
I. INTRODUCTION
Electric bicycle torque intelligent sensor (known as
PAS torque sensor1:1 power-assisted). It is a high-tech component
designed for electric bicycle with ergonomics. It has superiority
to match well with all electric bicycles available in the
market. It employs the dual-magnetic loop - Hall elastic
angle difference to detect the dynamic torque, which is converted
to DC signal and sent to the controller.
II. FUNCTIONS AND ADVANTAGES
1. High universality: Applicable to brush / brushless, high / low
speed controller - electrical system, *4V/*6V power system; apply
to ordinary bicycle D-type models.
2. Facility to install: Install as the normal chain wheel crank in
every size.
3. Assistant power adjusting function: It has five assistant power
level and the battery will be displayed on a dashboard.
4. Riding on comfortably: Large linear torque range with great
stability and you will feel more soft when the gear changes.
5. Prolong battery life-span: Half of the output power can avoid
the damage of the high-power output bring on the battery. Also the
product can reduce the power automatically when the speed is
increasing. At the same time, the mileage can be increased twice or
more.
6. Good security: Good operation security sensor can control the
speed very well and the electric power can be turned off in 1s
after the pedal stopped.
7. Well acclimatization: it has excellent anti-jamming ability that
can work as normal in dirty water.
8. Speed limitation: The vehicle can set a maximum speed
transmission ratio (such as: *5 km / h power cut)
9. Our controller use the method of voltage and current dual
control, so it can save more battery, smoother, lower noise, lessen
vol., dormancy function. It is your ideal choice. (Size:
*4x*5x*5mm)
In no matter domestic or foreign market,
it is more versatile and has a fine price-ratio comparing with
similar products.