Description

HH***1 super-heated water bath I. Overview: HH***1 super-heated water bath is used and imported stainless steel plate manufacturing process, various technical indicators have reached the national standard, is the upgrading of super-heated water bath products. He has high precision temperature control, corrosion-resistant strong, compact and handsome in appearance, energy saving, long life and other characteristics apply to the biological, physical, plant, chemical, medical, environmental protection and other areas of experimental science, directly or auxiliary heating of precision instruments Products. II. Structure: Super-heated water bath shell using metal plates and the interior lid imported stainless steel, corrosion resistance stronger control box installed directly on the water tank, intelligent temperature control for temperature control, easy to operate; adopts the fire in the U-tube water heating, warming Fast, small heat loss. Imports of high-quality water tanks, pumps used as a cycle of power to address the shortcomings of the uneven temperature, the temperature control equipment and precision are to achieve a higher degree requirements. III. Technical parameters: 1. Power: **0 V / *0HZ 2. Temperature: room temperature ~ **0 ?æ&frac*4;¯SPAN> 3. Constant temperature fluctuations: ?Ü&frac*4;/SPAN> ??/SPAN> 0.5 ?æ&frac*4;¯SPAN> / heating power: ***0 W 4. Thermostat settings and Measurement: digital temperature control (LED in the four-digit) 5. Pump flow: ?Ý&frac*4;/SPAN> 4 L / min power: *0 W 6. Total power consumption: ?Ü&frac*4;/SPAN> 1.2 KW 7. Working Size: **0 ??**0 ??**0 (mm) IV. How to use: The equipment used **0 V AC power, make sure to use the former outlet rated current of not less than 6 A, and a safety grounding devices (please use the indoor access at work grounding devices). Please note that when water from the cover of not less than 8 cm (super-heated water bath tank plus water) must be drinking water, preferably with distilled water, not to use well water, river water, spring water, and other hard water to prevent heating pipe burst and the impact of temperature sensitivity. (Note to jack into equipment, Zaicha power jack), the first to open the power, open the circulating pump, and then in accordance with the instructions for use smart temperature controller (KW****0DB) temperature settings, smart temperature controller will automatically thermostat. V. NOTES: 1. In Please read carefully before using this statement, closing Shuizui *0 million to add water to remember that the water level line, and then connected to power. 2. The water level can not be too high to prevent water overflow caused by experimental errors. 3. To extend the useful life of equipment, please do not pay attention to the control box exposed to moisture, to prevent leakage. 4. The equipment from the factory warranty from the date of ***1 (man-made or are used improperly or nominal fee), life-long maintenance. 5. I should be grateful if the end use of water (from a Shuizui)-clean, dry cloth to wipe clean, dry, ventilated place. Jinan Labtek Biological Co., Ltd Tel: ***************1 Fax:***************1 E-mail:***** Web:***** ***** Address: Room **2 Honglou southern Road No. 6 Licheng, District.Jinan Shandong *****0, China.