Sell Q2000-E Separated Controller and Reader

Description

Product Description Q****-E Build-in access controller and External Card Reader Specification Supply Voltage: DC*2V Working Current: less than ***0 mA Static current: less than *0 mA User capacity: **0 Cards Read Card distance: more than *0CM Read Card type: EM Card or Compatible with EM Card Operation Temperature: **0°C**0°C Operation Humidity: *0%**0% Access control machine program method 1. User Card Register *Press Key # six times, the Buzzer make long sound BI, POWER (Red), OK (Green), Mode (Yellow) is on at the same time. *Input 5 digits PIN (Default Password is ****5), OK (Green) is off. The machine enters Making Program Status. *Press key 2, MODE light (Yellow) is on, POWER (Red) and OK (Green) light are off. *Input 4 digits User ID (Such as: ***8), the POWER (Red) and OK light (Green) flash. *Read the user card that needs log in, a sound BI will be heard, POWER light (Red) is off, OK (Green) and MODE light (Orange) are on, the user card is registered successfully. *Press Key 6 to Exit programming status. 2. Other Setting Change Program Operating Password *Press key 1, The MODE (Yellow) light is on, POWER (Red), OK (Green) light is off. *Input PIN as your will (Example, ****6), the Buzzer make a short sound of BI, OK (Green) is on, POWER (Red), MODE (yellow) is on, PIN has changed successfully. Note: The PIN should be kept; you will need it to enter the Making Program Mode next time. If PIN forgotten, please execute Machine Initial Step. Delete the single user card *Press key 3, MODE light (yellow) is bright, POWER (Red) and OK (green) light are off. *Input 4 digits user number that needs to be deleted. (Series No on card, such as: ***8), a sound BI will be heard. This means the deletion is successful. Delete all registered cards *Press key 4, BI will be heard twice. All the registered cards and passwords are deleted. Open Door time is 3 second