Description
ST-C100S Series
10/100M Ethernet SingleMode Fiber Media Converters.
ST-C100S series Fiber Media Converters can convert Optical-Electric
Ethernet signals between 10/100M UTP interface (TX) and 100M
optical fiber interface (FX). It can extend traditional
10/100M fast Ethernet to the distance of 120km through optical
fiber link. ST-C series external power supply Converters could be
used alone, or inserted to 14 slots Converters Rack suitable for
the use of Network Centre.
Main features
1. Auto negotiation function allows UTP port to auto select 10M or
100M, and Full Duplex or Half Duplex.
2. UTP port supports MDI/MDI-X auto crossover.
3. Multiple Optical Transceiver could be chosen: SC, ST or FC,
singlemode / multimode
4. Supporting 1600 bytes packet for management
5. Converter working mode could be chosen: Store and forward switch
mode, Modified cut-through switch mode, or Converter mode.
6. Internal Circuit of prevented thunder could greatly reduce
damage of the converter caused by thunderbolt induction.
7. Internal or External switching power: for users to choose.
Technical Specifications
1.Operating standards:IEEE802.3u,10/100Base-TX and 100Base-FX;
2.MAC addresses table: 1K
3.Data buffer: Built-in 128Kbyte RAM .
4.Connectors: UTP Connector: RJ-45,10/100Mbps; Fiber Connector:
ST/SC/FC,100Mbps
5.Cable:
UTP: Cat. 5(the max distance up to 100m)
Fiber ( Singlemode): 8.3/125, 8.7/125, 9/125, 10/125μm(the max
distance up to 20 -120km)
6.Flow Control
Full Duplex: Supporting standard IEEE802.3x
Half Duplex: back pressure
7.LED: Power, FX SD,FX Link/Act,TX 100,TX FDX,TX Link/Act.
8.Power Requirement: AC 170 ~ 240V, DC 5V.
9.Ambient Temperature: 0 ~ 70’C
10.Humidity: 5 ~ 90%
11.Dimensions: 26x70x93mm
