Description
ST-C1000S
10/100/1000M Gigabit SingleMode Fiber Media
Converter
ST-C Series Gigabit Fiber Media Converter can convert
Optical-Electric Ethernet signals between 10/100/1000M UTP
interface (TX) and 1000M optical fiber interface (FX). The
traditional 10/100/1000M gigabit Ethernet can be extended to the
distance of 100km through optical fiber link. ST-C Series Gigabit
Converters could be used alone; but Converter Card should be
inserted to 16 slots RACK suitable for the use of Network
Centre.
Main features
1.Auto negotiation function allows UTP ports to auto select
10/100/1000M and Full Duplex or Half Duplex.
2.The UTP port supports the connection of MDI/MDI-X auto
crossover.
3.Singlemode Fiber: the max distance up to 100km
4.Supporting the max 1536 byte Ethernet packet
5.Supporting flow control
6.Adopting internal power supply
Technical Specifications
1.Operating standards: IEEE802.3z/AB, 1000Base-T and
1000Base-SX/LX
2.MAC address table: 4K
3.Data Buffer: 256K
4.Connector: UTP: RJ-45,10/100/1000Mbps; Fiber: SC,1000Mbps
5.Cable :
UTP cable: Cat 5e or Cat 6(the max distance up to 100m)
Fiber : multimode : 50/125, 62.5/125μm(the max distance up to
550/224m)
singlemode : 8.3/125, 8.7/125, 9/125μm (the max distance up to
100km)
6.Flow control
Full Duplex: IEEE802.3x
Half Duplex: back pressure.
7.Power:AC 220V(170-260V) 50Hz; DC 5V,2A
8.Ambient temperature:0 ~ +50’C
9.Storage temperature:-20 ~ +70’C
10.Humidity:5% ~ 90%
11.Dimensions:26 (high) x70(width) x93 (length) mm
