Description

BH***0 Shaping Machines Application BH***0 　This machine is suitablle for shaping plane and formed surfaces. High productivity can be obtained for shaping plane surface, T-slots and dovetail slots, etc, on narrow and long workpieces. 　The ram mechanism of this machine adopts the guide unit with torsion-spring internally fixed. During the ram movement the cutting tool can be adjusted to an arbitrary position. 　The total closed cam-ratchet unit is employed in the feed mechanism and rapid travel mechanism of the table featuring change of feed amounts without stopping the machine during cutting. A disk-type overload safety unit is used. 　Owing to the adoption of swivel device with cam-curve groove different speeds can be selected arbitrarily. Specifications 　Max. shaping length **0 mm 　Max. distance from lower edge of ram to 　table **0 mm 　Max. travel of table 　Horiazontal **0 mm 　Vertical **0 mm 　Rapid travel of table 　Horiazontal 0.*5 m/min 　Vertical 0.*4 m/min 　Max. vertical travel of tool head **5 mm 　Frequency of ram strokes *1, *0, *8, *2, *2, **0 times/min 　Table feed per ram stroke 　Pawl riding over 1 ratchet tooth 　Horiazontal 0.*7 mm 　Vertical 0.*5 mm 　Pawl riding over *0 ratchet tooth 　Horiazontal 0.*8 mm 　Vertical 1.5 mm 　Tool head (down) **0.4 mm 　Tool lifting (linear speed) <*0 m/min 　Motor 4kW.**0 r/min 　Vice measurements ï&frac*4;ˆL× W× Max. openingï&frac*4;‰ **0×*4×**5 mm 　Overall dimensionsï&frac*4;ˆL× W× Hï&frac*4;‰ ***0×***0×***0 mm 　Packing sizeï&frac*4;ˆL× W× Hï&frac*4;‰ 　Export ***0×***0×***0 mm 　Import ***0×***0×***0 mm 　Net Weight ***0 kg 　Gross Weight ***0 kg