Description

This machines is designed for shaping plane and formed surfaces. If used for shaping plane surfaces, T-slots and dovetail slots, etc. On narrow and long workpieces, the machine will obtain much higher productivity. With the equipment of a special vice or a diveding head, the machine can be set for processing the end surfaces and slots with equal distance on cylindrical or rectangular workpieces. Specifications 　Max. shaping length **0 mm 　Max. distance from lower edge of ram to 　table **0 mm 　Max. travel of table 　Horiazontal **0 mm 　Vertical **0 mm 　Max. swivel angle of table 　Without vice ±*0° 　With vice ±*5° 　Max. vertical travel of tool head **0 mm 　Frequency of ram strokes *5, *4, *7, *1, *4, *0, **2, **6, **8 times/min 　Table feed per ram stroke 　Pawl riding over 1 ratchet tooth 　Horiazontal 0.***5 mm 　Vertical 0.**3 mm 　Pawl riding over *0 ratchet tooth 　Horiazontal 0.**5 mm 　Vertical 1.*3 mm 　Motor 3kW***0 r/min 　Vice measurements 　ï&frac*4;ˆL× W× Max. openingï&frac*4;‰ **0×*4×**5 mm 　Overall dimensionsï&frac*4;ˆL× W× Hï&frac*4;‰ ***3×***0×***3 mm 　Packing sizeï&frac*4;ˆL× W× Hï&frac*4;‰ 　Export ***0×***0×***0 mm 　Import ***0×***0×***0 mm 　Net Weight ***0 kg 　Gross Weight ***0 kg