Ring Hammer Crusher

Description

PCH Series Ring Hammer Crusher owns the impact rotor with a special ring hammer. When the material enters into the crusher, it can be crushed by the ring hammer which is revolved by the high-speed motor, at the same time the material obtained the kinetic energy and rushed at the impact plate receiving the second crushing process, then falls on the screen sieve and be cut, extruded, and grinded by the ring hammer. At last the materials that come up to the standard can be discharged by the machine. Uncrushable material enters into the metal collector and should be eliminated regularly. PCH Series Ring Hammer Crusher is used to crush coal, especially brittle materials, like gangue, coke, slag, red sandstone, shale, loose limestone, etc. The compressive strength of the material does not surpass**0MPa. It has the following features: energy-saving, fine output size, higher efficiency, and lower noise, less dust pollution and so on. Model PCH****2 Speed of Rotor(r/min) **0 Rotor (Diameter× Length) (mm) **0× **0 Max Feed Size (mm) **0 Discharge Size (mm) ≤*0 Motor Model Y**2M**6 Motor Power (KW) 5.5 Capacity (t/h) ***2 Model PCH****4 Speed of Rotor(r/min) **0 Rotor (Diameter× Length) (mm) **0× **0 Max Feed Size (mm) **0 Discharge Size (mm) ≤*0 Motor Model Y**0L*6 Motor Power (KW) *1 Capacity (t/h) ****5 Model PCH****4 Speed of Rotor(r/min) **0 Rotor (Diameter× Length) (mm) **0× **0 Max Feed Size (mm) **0 Discharge Size (mm) ≤*0 Motor Model Y**0L*6 Motor Power (KW) *5 Capacity (t/h) ****3 Model PCH****6 Speed of Rotor(r/min) **0 Rotor (Diameter× Length) (mm) **0× **0 Max Feed Size (mm) **0 Discharge Size (mm) ≤*0 Motor Model Y**5M*6 Motor Power (KW) *0 Capacity (t/h) ****0 Model PCH****8 Speed of Rotor(r/min) **0 Rotor (Diameter× Length) (mm) **0× **0 Max Feed Size (mm) **0 Discharge Size (mm) ≤*0 Motor Model Y**0M*8 Motor Power (KW) *5 Capacity (t/h) *****5 Model PCH****0 Speed of Rotor(r/min) **0 Rotor (Diameter× Length) (mm) ***0×***0 Max Feed Size (mm) **0 Discharge Size (mm) ≤*0 Motor Model Y**5M*8 Motor Power (KW) *****0 Capacity (t/h) ******5 Model PCH****6 Speed of Rotor(r/min) **0 Rotor (Diameter× Length) (mm) ***0×***0 Max Feed Size (mm) **0 Discharge Size (mm) ≤*0 Motor Model Y****8/Y****8 Motor Power (KW) **5/**0 Capacity (t/h) ******0/******0 Model PCH****6 Speed of Rotor(r/min) **0 Rotor (Diameter× Length) (mm) ***0×**0 Max Feed Size (mm) **0 Discharge Size (mm) ≤*0 Motor ModelY****8/Y****8 Motor Power (KW) **0/**5 Capacity (t/h) ******0/**0/**0 Model PCH****1 Speed of Rotor(r/min) **0 Rotor (Diameter× Length) (mm) ***0×***0 Max Feed Size (mm) **0 Discharge Size (mm) ≤*0 Motor ModelY***0 Motor Power (KW) **0ï&frac*4;ˆ**0ï&frac*4;‰ Capacity (t/h) *******0