Description

This innovative tool measures and lays out any angle accurately and quickly. Its four threaded holes accept the locking knob through which you can select the hole based on the range you require. Removing the knob provides a full **0 degree measure range. The unit not only equip the LCD to display, also provide a analogue quadrant for moving blade to instruct the azimuth of the angle which been reading, this will help you to read the content easier. The unit widely applied in making, using, examining or repairing machines, vehicles, and tools, such as driving shaft alignment and wheel alignment, installing precision machines, also used in manufacturing materials of decoration and architecture, and in its process of decoration, architecture. Features: (1) Conversion between absolute measurement and Relative measurement. (2) Hold function to freeze measurements. (3) Automatic shut off after 5 minutes. (4) Easy to measure all kinds of angle and draw lines. (5) Easy to recalibrate without special tools. (6) Easy to read**- digital display through LCD and analogue quadrant. (7) Could take any angle as 0 degree. (8) Accurate level bubble for measuring horizontal level. (9) Lock the moving blade at any angle**-making different measuring range by locking at four different locking holes. Specifications: (1) Resolution: 0.*5 degree / 3`. (2)Accuracy: 0.1 degree; the rest degree≤0.2 degree. (3) Measuring range:**0 degree. (4) Working current : <*0uA. (5) Work temperature : *5 oC~**5 oC (6) Working humidity: ≤*5%RH. (7) Power: 3V CR***2 Lithium battery. (8) Battery life: More than ***0 hours. (9) Dimension: *0.5*1.*7*1.*2 Inch (The further detail introduction, please browse our website and download just by clicking Introduction Sheet Download in the bottom right hand corner of the respective model.)