SV-5Q Automobile Exhaust Gas Analyzer

Description

SW*5Q automobile exhaust gas analyzer, in accordance with non-light-disguising infrared absorption method, via micro-computer analysis, directly measure the thickness of HC, CO and CO2 in the exhaust gas of vehicles and inspect the density of NO and O2 via Electrochemical sensor so as to calculate excess air coefficient λ. The analyzer introduces advanced foreign technology. It is composed of complete imported machinery cores, boasts the advantages of accuracy measurement, high endurance and speed. As an Intelligent Equipment, it is equipped with Microprocessor, LCD and Chinese language interface. Besides, it also has optional equipments such as Induction Tachometer, temperature sensor, inner Micro Printer for customers to purchase. The newly-added Storage function can detect Engine&#**9;s speed and Lubricant&#**9;s Temperature while measuring tail gas, then store and print the results. Besides detecting functions, its computer programs on detection under Two-speed Idle, written by us according to limits and measurement methods for exhaust pollutants from vehicles equipped ignition engine under two-speed idle conditions and simple driving mode conditions, can control the process of detection automatically. So it&#**9;s convenient to use. The analyzer has small size, light weight, storage of **0 groups&#**9; data of exhaust gas measurement. Particularly it is suitable for check along the road. It&#**9;s utilized for auto-manufacturing factories, vehicle inspection stations and garages. The main technical parameters: 1. Environmental temperature Temperature:*5ï&frac*2;ž*0℃ humidity: ≦*5% Air pressure: *0.0ï&frac*2;ž**6kPa Power: AC **0V±*0%;*0Hz±1Hz ***** scope: HC: 0ï&frac*2;ž****0　***6ï&frac*4;ˆppmï&frac*4;‰vol CO: 0ï&frac*2;ž*0.0 ***2(%)vol CO2 : 0ï&frac*2;ž*0.0 ***2 (%) vol O2 : 0ï&frac*2;ž*5.0 ***2(%)vol　 NO: 0ï&frac*2;ž***0 ***6ï&frac*4;ˆppmï&frac*4;‰vol　　 oil temperature:0ï&frac*2;ž**0℃ rotate speed: 0ï&frac*2;ž****0rpm 3.Sampling method: tail gas: sampling directly 。 The length of sampling tube: 5mï&frac*4;Œthe length of probe:**0mm。 Oil temperature:inserting the head of thermo scope into the staff gauge of engine lubricant, the length of which is the same as that of oil staff gauge; blocking with rubber plug to plug up engine oil from ejecting: length of lead: 5m. Rated rpm: Non-contact measurement method. Less than *0cm to the petrol high-voltage flexible cord, measuring petrol rotate speed. 4.preheat time:*0mins *****: CO: 0.*1%　vol　　 HC: 1ppm　vol　normal hexane equivalent CO2: 0.*1%　vol　　 O2 : 0.*1%vol NO: 1ppm　vol rate speed: 1rpm oil temperature: 0.1℃ ***** error: CO: ±0.*6% vol or±5% relative error. HC: ±*2ppm vol or ±5% relative error CO2 : ±0.5% vol or ±5% relative error O2 : 0.1% vol or±5% relative error NO: ±*5ppm vol or±5% relative error rate speed: ±*0rpm(0ï&frac*2;ž****0rpm) ±1% measured value (>****0rpm) 7.Stability:after preheating, zero excursion and measurement distance excursion in 4 hours should not be over the allowance value of sample value error *****: ≤1/2 of absolute of the allowed sample value error ***** signal: Number volume: RS**2 serial massage exit.