Description

The swimming pool water pump is specially developed according to the operational features of the swimming pools both domestic and abroad and is suitable for cleaning and removing dirt to keep the water in good quality and for eliminating the inconvenience to change the water often. The pump is equipped with a special filtering system, which is fully mounted on a hand truck, where the process from sucking water to becoming standard water quality by filtering is finished. The working principle of the swimming pool water pumps and the completing device is as below: 1. Both water and filth are sucked into the suction disk 2. Then go into the pump to be roughly filtered to get rid of larger grained dirt such as leaves 3. Then go into the filter tank through the transport flexible tube to be fine filtered 4. The clean water via filtering goes back to the pool, thus the filtering is finished This set of equipment has an advantage that it is unnecessary to change the pool water, only periodically using it to clean and filter and the operation becomes facilitated with the hand truck used. It is powerfully competitive in the world market due to its convenient movement and superior performance. It can also be used for the cold - hot circulation system of sauna. Technical parameters: 1) Pump body: ABS 2) Impeller: Noryl? ABS 3) Motor closed, externally ventilated 4) Insulation class B (class F if required) 5) Protection class IP*4 or IP*4 6) Duty continuously rated 7) Mechanical seal Φ*2 and Φ ceramic steatite / metalized carbon 8) Shaft stainless steel 9) Thermal protector