Description

Remote Controller Features: BV-LED RGB wireless controller is signed for LED lighting dimmer. It can control modules, LED ribbons, LED bars, high-power LED modules and other LED lighting fixtures, which form the complete LED lighting dimmer system with *2V DC power supply Specifications: Working temperature: **5 to *0 degrees Celsius Power: *2V DC Measurement: **4 x *5 x *4mm Connection: common anode Rated load current: *0A Maximum load current: *5A Output: three CMOS output Control method: four buttons, wireless control Buttons (from top to bottom): mode, up, down, on/off Mode: Static red, static green, static red/green mix, static blue, static red/blue mix, static green/blue mix, static red/green/blue mix, jumpy cycle changing, disorder flash changing, radial cycle changing, disorder gradual changing Notice: Make sure the products working voltage must be *2V DC or it will be damaged. The wireless control should be powered by *3A, *2V battery. Please connect according to the above sketch map. The connection port can be pulled out When the power is on, the red indicator will light, the green indicator do not light. The controller is waiting for work. To press the on/off button, it will began to work. The green indicator will flash when pressed any button unless it is out of work Up and down button: It can work only when the controller is in color changing mode Our packing is one wireless control matched one controller. Please do not use other wireless control or it will not work