Description

Advantage: 1ï&frac*4;ŽDesigned for self-sustaining solar operation 2ï&frac*4;ŽEasy installation, save cost, beautiful appearance 3ï&frac*4;ŽEasy to check the flux of pipeline, temperature display. 4ï&frac*4;ŽConstant air separation during line operationï&frac*4;Œcheck system whether have leakage. Components 1. Safety valve: protects the system components against excessive over-pressure in all operating phases. 2.Ball valveï&frac*4;Œcheck valve: Brass material 3.WILO pump: this pump is a standard device in the systemï&frac*4;Œit required operating point can be preselected using one of the three levels. 4. Manometer: adopt hydraulic aseismatic manometer with a range from 0 to *0 bar indicates the system pressure. ***** of expansion vessel: install expansion vesselï&frac*4;Œavoid the system working at minus pressure. 6. Flow sensor: timely monitor medium flow of the whole system. 7. Exhaust setting: Adopt spray-paint steel tube; it can release air cause of medium flow in the pipeline. According air quantity and frequency which cause of system, we can examine whether this system have leakage phenomenon. 8. Pipeline temperature display: medium temperature between right trip and return trip, can be displayed at first time. Temperature sensors are packed in a tube, Do not need to turn off any parts when replace it. ***** inlet: urning the handle *0°to left so that medium can be injected in it. *0. Heat preservation material: EPS *1. Screw thread: 1/2inchï&frac*4;Ž *2. Maximum working temperature of pipeline: flow tripï&frac*4;ˆmanometer sideï&frac*4;‰**0℃ return tripï&frac*4;ˆpump sideï&frac*4;‰**0℃