Ultrasonic flowmeter

Description

Because of the use of advanced multi-pulse, signal processing and error correction technologies, the meter is highly adaptable to industrial working conditions. It is adaptable for flow measurement in chemical, enviormental Protection, coal, cement and ceramic setor. The meter is compact in size and low in power consumption and capable of working continuously for no less than 5 hours with a built-in battery. The meter is provided with a built-in USB interface to which a computer can be connected for convenient data reading and storage. It has also a multiple of memory functions. It is a portable meter using clamped on type transducer. Measuring Rangeï&frac*4;š Pipe size, mm DN**-DN***0 Flow velocity, m/s ±0.*1ï&frac*2;žÂ±*2 Measuring Accuracy, % ±1.5 Display 2X*6 digit back-lit liquid crystal simultaneous display of instantaneous and cumulative flowrate, and key display of cumulative running time Data Storage Modeï&frac*4;š Immediate Up to **2 sets of data can be readily stored during measurement Cyclic Up to **2 sets of measured records can be stored for a tagged pipe, according to the set storage cycle Fluid measured: Fresh water, waste water and other homogeneous fluids in full pipe flow. Power Source: Conversion unit( Built-in 3.6V Ni-MH rechargeable battery. Continuous running time: no less than 5 hours) Power adaptor: AC**0V Output: DC5V (built-in Ni-MH battery: DC3.6V) Power Conversion unit: <3W Working Environment Conversion unit &Printer Temperature:**0℃~**5℃ Humidity:<*5% (RH) Transducer Temperature: 4℃~**0℃