Description

HEAT PIPE VACUUM TUBE (Pressurized & Pre-heated) solar water heater SERIES SYSTEM MSTH*8XX Copper heat pipe inside the vacuum tubes used to make the system working without interupt if one or some of the vacuum tubes were damaged. The syatem can be connected directly with running water. The running cold water will be heated just in time through the system. How the System Work? Copper coil is used as heat exchanger inside the water tank The storage water tank acts as a thermal source The system is connected directly with running water and can withstand 0.6 Mpa Cold water flows directly through copper coil and hot water could be supplied just in time. Specifications: Solar Collectors: Vacuum Tubes *8x***0 mm with copper heat pipe inside of the vacuum tubes Material of Outer Tank: Colored steel plate, thickness: 0.5 mm Material of Inner Tank: Stainless Steel SUS**4 2B (Food Contacting Safety), thickness: 0.4 mm Material of Frame Support: Angle steel with sputtered plastic coating, thickness: 1.5 mm Insulation Layer of the Water Tank: Polyurethane foam *0~*5kg/m3, thickness: *0 mm Heat Preservation: *2 hours Pressure Bearing: 0.6 Mpa Relative Accessories (we can add them to the full set of solar water heater system if required in your here): -Controller (which indicates the water level in tank, the temperature, controls the pump and the heating) - Assistant Tank (to make the water tank always with full water capacity) - Electric Heater 1.5 KW NOTICE PLEASE: You are welcome to contact with us by email or fax message if you: 1, Need more technical details of the products above 2, Want to submit your special designing or production requirements We will come to in touch with you within 3 working days after receipt of your mess