CoExtruded CPP Transparent Film Line

Description

This line is mainly used for producing three-layer/five-layer co-extruded CPP, CPE, CEVA flat film and high barrier film with PA and EVOH. Characteristics: The screw adopts special mixing function and high plastication design, combining European static mixer to ensure good plastication, good mixing and high output. Adopt European/American imported fully automatic adjusted die and automatic thickness meter with APC control to check the film thickness automatically on-line, the die will be adjusted automatically European imported cooling roller with special screw runner to ensure good cooling and forming effects under high speed production. The positive pressure and negative pressure device are attached to make sure film melt steadily Edge film will be recycled on line directly, save the production cost effectively. European fully-automatic central winding, imported tension controller is attached, automatic roller change and cut-off, which is easy to operate. Model ***0mm ***0mm ***0mm ***0mm Screw diameter(mm) *5/**0/*5 *0/**5/*0 **0/**0/**0 **0/**0/**0 L/D ratio of screw *2:1 *2:1 *2:1 *2:1 Width of die head(mm) ***0 ***0 ***0 ***0 Width of finished products(mm) ***0 ***0 ***0 ***0 Thickness of finished products(mm) 0.****0.*2 0.****0.*2 0.****0.*2 0.****0.*2 Max extrusion capacity(kg/h) **0 **0 **0 ***0 Design line speed (m/min) **0 **0 **0 **0 Total power(kw) **0 **0 **0 ***0 Overall dimensions(L×W×H(m) *6×6×5 *8×7×5 *0×8×5 *0×*5×6 Weight(T) *0 *0 *0 **0