Description
Product
Overview
EAGER-A*5 hand-push crack sealing powered by generator sets, using
liquefied petroleum gas indirect heating material through
conducting oil, unique temperature control system avoid the
material aging problem. Built-in **0° shaft stirrer, faster the
heating speed, mixing evenly. Electric heating hose can avoid the
material condensation at low temperatures. Pressure injection makes
sealant bond to sidewall tightly, equipped with a steering flexible
caster tracking cracks, with fine pouring appearance, it is small
practical road surface crack maintenance equipment.
Product
advantages
1. Dynamic
power provide by Japan YAMAHA generator
2. Hot melting kettle
Hot melt kettle is mainly used for pouring hot melt materials,
heating, with capacity of *5L. Feeding port on top of the melting
kettle, material loading height is **0mm.
3. Heating
system
a. Using
liquefied petroleum gas as heating fuel, indirect heating materials
through heat conducting oil, improving the melting rate, heat
evenly and the material is not easy to aging.
b. heating temperature *0 ~ **0℃,
heating time of ****0 minutes.
4. Control system
Adopt centralized control panel displays the set and actual
temperatures of conducting oil, sealant material and heating hose.
All temperatures can be adjusted accurately, easy to
operate.
5. Stirring
system
Vertical paddle stirring structure set in the melting kettle,
manually stirrer rotation fast, so that the material heated to a
suitable pouring temperature.
6. Material
conveying system
a. Electric heating hose can ensure that the temperature inside of
the melting kettle and material pouring port basically the same, so
that the material pouring system is not easy to block.
b. pressure injection pouring, asphalt pump produces pumping
pressure to seal the material into the cracks.
c.
Applies to ordinary asphalt and crack sealant material; sealant
material pumping pouring through the asphalt pump, the flow speed
can be adjusted.
7. Walking
system
EAGER-A*5 is a hand-push type sealing machine, installed with
steering flexible caster, manual control material pouring
direction, suitable for filling regular and irregular cracks;
special wear-resistant rubber wheel.
