Description

High Temperature Cables BS ***1 PVC Insulated Cables Application : These cables are suitable for internal wiring of appliances and switch, control, metering and instrument panels of switchgear, etc Construction Standards : BS ***1, UL *3, CSA C*2.2, UL Flame test UL ***1/VW1 FT1 FT2 Conductor : plain annealed Insulation : Flexible PVC Temperature Range: 0 o C ***5 o C Voltage rating : 0.6 / 1kV Min. Bending radius : 3 x Overall diameter Insulation colours : 0.5mm² to *5 mm² Red, black, white, grey, brown, orange, yellow, blue, green, and green/yellow. *5mm² to **0 mm² Red, black and green/yellow. . Other colours available on request. Relevant Standards : To BS***1, UL Style ***5, ***8, ***3, ***4; CSA TEW **5 °C; UL VW *1 Vertical Flame Test Current Ratings The table below lists the full Thermal current ratings which will raise the Conductor temperature to *5 °C when one cable is installed in free air at an Ambient temperature of *5 °C. These ratings are applicable for installations which ensure that the operation of the protective device is not greater than 1.*5 times the continuous current carrying capacity of the cable. Where protection is by means of semi-enclosed fuses to BS ***6 the rating must be multiplied by a factor of 0.*6. Note:Sizes **0.0mm², **5.0mm² and **0.0mm², **0.0mm² & **0mm² are classed as dual Rated and are manufactured to UL & BS ***1 only.