Description

Mount the alarm unit to a door or wall using hardware provided(screw) and key hole opening on the back of the alarm unit. Remove the double-sided adhesive tape from the back of of the magnet unit that is attached to the alarm unit by wire. Mount it to right or left hand side of the alarm unit, depending on the way the door opens. Make sure the embossed arrow on the magnet is pointing away form the alarm unit. Remove the double-sided adhesive tape from the back of the second magnet. Make sure the embossed arrow is pointing towards the alarm unit. Line up the embossed arrows of the two magnets. Keep both magnet units very close to ecah other. Usage: There are three settings: CHIME, INSTANT, DELAY 1. CHIME: When a guest is entering your home by opening the door, a pleasant chime will announce the guest&#**9;s arrival. 2. INSTANT: When the switch is in the instant position, if a door is opened, the alarm will sound a **0dB alarm siren immediately. The alarm will stop sounding unless you enter your security code. 3. DELAY: When the switch is in the instant position, if a door is opened, you will have *0 seconds to disarm the alarm. If the alarm unit is not disarmed, the alarm will sound a **0 dB alarm siren. The alarm will stop sounding unless you enter your security cod. Price:FOB YIWU USD 2.5/PIECE