JF-1100CB Batch Pre-expander :

Description

1.Use PLC programmable controller and touch screen to realize man-machine dialog. Use charging device of automatic negative pressure , electric weighing , level switch to realize feeding and gauge. Use auto-controller of temperature and pressure in the chamber and photoelectric level material to realize the uniform and light density of the beads. EPS beads is formed in the auto-cycle by shock sieve , crushing and transportation fan . 2.Use imported steam reducing valve and proportional valve (optional) to ensure the stable pressure of the reducing valve outlet, and the temperature tolerances within ± 1 ℃ in the chamber. If the block density is above *0kg/ m3, the proportional valve should be installed. 3.Hot air drying system (Patent) in the fluidized beds, temperature up to *5 ℃, ensure the EPS raw material drier , fast mold , speed up the aging process and shorten the production cycle. 4.Separation of auto-charging device and electric weighing with the machine avoids the inaccuracy and unreliability of electric weighing caused by operation . ***** security devices on the machine ensure it operates normally and safely . ***** production techinic memory and quantity statistic, operate can find the foam parameter of manufacturer’s used EPS raw material and simultaneously set the different foam parameter by themselves. For statistics and account of EPS production per day , week, month or year, the electric weighing can be installed with digital printer optionally. ***** communication system can be optionally used to monitor the machine and remedy its faults. Software system can be upgraded to improve its processing properties. 8.Use new EPS foam processing technology to improve its production efficiency, ensure EPS beads foam more accurately , lightly , fast and have low fault rate during its secure operation.