Description

Specifications: Wingspan: *5" Wing Area: ***5 sq. in. Ready-to-fly weight: 9.***0.5 lbs. Length: *6" Power: ******0 Glow - Up to *0cc Gas Features: Construction: Precision laser-cut balsa & plywood construction. Wings: Wing & stabilizer are built-up *-piece designs. Removable stabilizers. Wing Spars: Carbon fiber wing and stabilizer tubes / joiners. Incidence: Factory pre-set. Multi Wing Position: Adjustable "Floating" wing positioning. Control Surfaces: 3D Control surface area, double beveled. Covering: Factory applied Oracover covering. Vinyl graphics also included. Cowl: Precision color matched pre-painted fiberglass. Wheel Pants: Precision color matched pre-painted fiberglass. Canopy / Hatch: Pre-formed & pre-painted. Landing Gear: Carbon tube with covered airfoil shaped fairings. Triple bearing supported in the fuselage. Servos: One per Aileron / One per Elevator / One Pull-Pull Rudder / One Throttle. Hinge Slots: Pre-drilled for "Robart" style hinge points. Tuned Pipe: Pre-built tuned pipe / muffler tunnel. Building Time: 9 - *2 hours. Includes: Pre-built and covered wings, tail assemblies, and fuselage. All necessary hardware including pushrods, landing gear, wheels, servo tray, Carbon Fiber Wing and Stab tubes, and a photo illustrated instruction manual. Requires: Engine: **0 - **0 Glow engine or up to *0cc Gas Muffler: Tuned Pipes are suggested; however a stock muffler could be used. Radio: Minimum (4) channel radio. (Computer radio recommended) Servos: (5) High Torque - *0 oz. in. of torque - minimum. We recommend the use of metal gear servos. A higher torque servo may be desired for the Pull / Pull system. (1) standard servo for the engine. The control surfaces are very large and deflect over *5 degrees. A lot of power is required to prevent flutter and provide excellent holding power and full deflection. Spinner: 3 1/2" Misc. Items: Glow Plug, foam Padding, Fuel tubing, fuel filter, propeller, building and field equipment.