Description

Manufacturers and Exporters from India offers paper cones used for yarn winding. The popular sizes in the present Textile Industries are 9deg *5&#**9;, 5deg *7&#**9;, 4deg *0&#**9;, 3deg *0&#**9;, etc. are available with suitable surface finish like Embossing, Velvet Finishing, Flocking, etc. APPLICATION: Depending upon the application the specification of the cone varies. The popular sizes in the present Textile Industries are 9deg *5&#**9;, 5deg *7&#**9;, 4deg *0&#**9;, 3deg *0&#**9;, etc. In all yarn winding application, tension at the traverse extremes pulls yarn towards the cone centre. So we have to provide suitable surface finish to the cones like Embossing, Velvet Finishing, Flocking, etc. Generally, Embossing is used for coarse and lively yarns. This surface provides extra resistance to yarn slippage. However fine embossing surface is provided for medium count yarn and for the threads where take off could be restricted by the above bold embossing surface. This surface holds winding to full length, yet permits free delivery to knitting or sewing machine. Velvet Finish surface is ideal for fine cotton yarns and prevents damage to delicate filaments of synthetic fibres. Yarn will feed off smoothly without slouging, hanging or breaking. Velvet surface can be provided according to the requirement. Flocked Surface is found quite suitable for winding Rayon, Nylon and other low twist fine filament yarns. This is a smooth cone with flock finish provided on either entire areas or bonded at critical areas. The effect of flock can be controlled according to the twist, denier and number of yarn filaments. This surface also provides barrier to minimize absorption of coning oil by the paper.