Construction The wedge wire element in a nozzleis a slot tube.
Nozzles are closed on one side and have a threaded fitting on the
other. The flow is always out to in. Standard nozzles are *0 mm in
diameter, all having a flow-out-to-in (FOTI)
filtration. Principle Nozzles can be used for liquid/solid or gas/solid
separation, or media retention (sand, catalyst, resin, ....).The
nozzles are mounted on a support plate (as shown in figure). The
dimensions and the distribution of the nozzles on the support plate
can be altered to obtain an optimized flow
distribution. Application Above mentioned designs are used widely in
down-flow reactors for liquid/solid or gas/solid separation. The
liquid or gas can flow through the nozzles while the solids are
retained in the vessel by the nozzles.
