Solar Water Heater with Solar Collector

Description

Solar Hot Water System Introduction Separate Pressurized Solar Water Heating System breaks through the traditional structural design, that is collector and water tank are separated; the collector is connected to manifold. This model is more convenient and handsome. Currently, what our company provides are solar energy plus auxiliary electronic heating system as a whole heating system. Under normal circumstances, the system use solar energy for water heating and under the bad weather condition, the auxiliary electronic heater will make up the shortage of solar energy. Feature 1. Collector separates with the storage tank. The tank can be put anywhere of the house. 2. The collector can be put on the inclined roof or flat place. 3. Module design, arbitrary combination, harmony with the building perfectly. 4. Intelligent control and automatic operation. 5. Anti-freeze: no water inside the tubes when it works. 6. The system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature. 7. Multifunction: Bathing, washing, domestic heating. 8. Workable at anytime and enjoyable. Working principle A. When the temperature of the heat collector reaches the set value, the Controller shall start the circulation pump automatically. B. The circulation pump makes heat-conducting liquid circulate automatically. C. The heat-conducting liquid transfers heat to water by heat exchanger in the water tank. In case the temperature of the water tank does not reach T-max (Temperature Maximum Point), then start the auxiliary heating device. 2.High Pressure Water Storage tank 3.Working Station The unit gathered the Controller, Circulate Pump, Flow meter, Relief Valve, Pressure Gauge, Expansion Vessel, Shut-off and check Valve in together. There are two model: SLWSA (low cost and simple systems) SLWSD (relatively high cost and easy to fix systems