wireless auto-dial burglar alarm(SA2200)

Description

The SA***0 is a very powerful landline alarm, it supports the international protocol*-Ademco Contact ID, the ademco contact ID can report all the messages to the monitor center, including: Fire alarm, burglar alarm, Panic alarm (Stay arm zones alarm), Emergency alarm(SOS), medical alarm, tamper alarm, Pin code wrong 3 times alarm, Main fails alarm, Arm, Disarm, Periodical test (once *4 hours), the main functions for the panel are as below: 1. LCD and blue back-up light, all the setting can be viewed directly on the LCD 2. English voice prompt for every step 3. *5 event log about arming, disarming, and alarming. When alarming, the time, zone number and detector number could be viewable on the LCD 4. When working with Center Station through Ademco Contact ID, the panel can set to speak: after alarm date transmitted, the center station operator can speak directly with the user to make sure whether it is a real alarm or just simply a false alarm, when not working with Center Station, when the panel alarms and auto dial, the user can listen in, speak, sound siren, disarm remotely from user’s phone. 5. 6 groups timed auto arm/disarm, Away/Stay arm optional 6. Every zone can be programmed seperately, it can set to be: watchdog zone, exit/entry delay, *4 hours zone, sounder/silent when alarming, armed/part armed zone. ***** we can set zone 3 with delay timer, zone 4 without delay, or zone 2 is *4 hours zone, while zone 3 is normal zone, etc. 7. evry detector can be set to doorbell when disarmed, every detector can be set to locally alarm(do not dial out) when triggered in disarmed mode 8. every remote can be set to request assistance siren on/off 9. Siren could be set to sound when away arming *0. When using our pir, ceiling mount pir, directional pir and vibration sensor, these sensors can display low voltage on the LCD and should beep *1. Every zone can be seperately armed/disarmed (*4 hours zone can not seperately disarmed)