Description

Technical parameters of photomultiplier pinhole detector
Function of the product : Detect the pinhole on the leveled plate witn high speed
Detecting method :Ultraviolet tube
Diameter of detecteble pinhole
Utraviolet sensor:Photomultiplier
The minimum time interval of contiguous pinholes:5ms versus pinhole of *5μm
Maximum speed :***0m/min
Maximum speed ：：*0mm/second
Self calibration :The maximum time interval is one week under general conditions ,and more frequent  self calibration must be conducted under worse conditions to ensure the normal operation of the system.
The width of detected material: **0mm ***0mm ***0mm
Serial port connection :
1) Rs**2 serial port control system is provided to monitor status and primary sensor data.
2) Reserved RS**5 interface.
Power requirements:
1)5V TTL output
2)Optical coupling output
3)Two lines of SPDT Relay output ,which can switch *0A **0V to high resistance
4)NPN open collector output.
power consumption **0VA ,including ail options Peak power **0VA,including motor margin following .
Working temperature : **0℃**0℃