Digital Tire Gauge

Description

Brief Instructions A.1 Power on 1. Press and hold the until seeing “on” 2. Previously measured pressure will be displayed. A.2 Clear memory of last measurement 1. Press and hold the key until “CLE” shows on the screen. Pressure will be reset to zero. 2. Do this for every new measurement. A.3 1. Press the button each time to select desired scale from PSI. BAR. Kg/cm2 to KPA. A.4 Measuring pressure 1. Push gauge head onto the tire valve then hold for about 1 to 3 seconds. 2. Remove the gauge and read pressure. 3. For next measurement, clear the memory first as mentioned in A.2 A.5 Auto off /manual off 1. With no further measurement or key pressing. The gauge will power off automatically in about *0 to *0 seconds. 2. To turn off the gauge manually, press-and-hold the key until it shows “OFF” if you fail to do so. Please do it again. A.6 Last pressure memory 1. Before auto off, TG**1 asves the pressure in memory. If will show up in nest power-on A.7 S+A (start) mode 1. Press-and-hold the key you will see “CLE” , “OFF” then “S+A” shows in the screen one after another, release the key when you see “S+A”, the pressure is reset to 0 and PSI scale is selected. 2. Should any unpredictable condition happens, you may use this function to reset everything back to normal.