Deadbolt lock D101PB

Description

Deadbolt Series
Specifications
Installation
1 1/2" (*8mm)diameter cross bore
1" (*5mm)diameter edge bore
Trim diameter
*5mm
Cylinder
Available with 5 pin (standard) or 6 pin. Construction key or mater key
available
Door thickness
Deadbolt assemblies provide automatic adjustment to door thickness from 1 3/8"(*5mm) to 1 3/4" (*5mm) when so ordered.When ordering for doors over 1 3/4"(*5mm), specify exact door thickness.
Latches
Supplied with 1' (*5mm) throw adjustable latches to fit 2 3/8" (*0mm) and 2 3/4" (*0mm) backset. Latch for 5" (**7mm) backset will be supplied when specified.Standard latchface is 2 1/4"x1" (*7x*5mm) square ***** and drive-in available when specified. Inside the deadbolt is a concealed hardened free turning steel roller to prevent sawing through.
Reversible
Can be used for both left doors and right doors. No cylinder reversing is necessary.
Packing
One set per box with screws and instructions for installation. Blister packing available when specified.