Description

Overview Model JZV Series High-efficiency Fluid Bed Dryer is used for drying with boiling method for granule which diameter range 0.**6mm. It is widely used to dry rapidly the finished or semi-finished products in pharmaceutical, foodstuff, light manufacturing and chemical industries. Features ***** raw material container is a cylinder and sealed with an O-ring, and it is easy to operate, as well as rapid and reliable. ***** container equipped with a blender, the dried material has good fluidity, no end-corner, and dry fast and uniformly. ***** top part equipped with a filter bag and a bag auto-shaking device to prevent the raw material from wasting. 4.With rapid drying speed, the drying time of every batch of raw material is only about ****0 minutes. ***** end-cover with a butterfly, with less wind resistance and no end-corner. All processes are performed within tightly sealed operation, no cross-contamination. 6.All material parts are made of Stainless steel, meeting GMP requirement. Working principle: The natural air was change to liquid material after heating and purification, and then is drawn by suction into a container, pass though a multipartite mesh under the pressure status of blending and negative. In a large area’s contact between gas and solid, the moisture of raw material (solid status) will evaporate rapidly and eject through the exhaust pipe, finish the whole drying process. For further information such as technical parameters please visit our Web.