Flat split Solar hot Water heating (with two coils)

Description

The JINYI Flat split Solar hot Water heating is an active system, because it uses a pump with a Flat plate solar controller to circulate the fluid between the heat pipe series Flat plate solar collector and the storage tank, tank and Flat plate solar collector are separate, while the collector is integrated in to the roof of the building, the tank and the pump station can installed anywhere of the building. The piping between the main components is made of brass and a special insulation with high temperature resistance for solar systems. An No coils System is suit for climates where there is no risk of freezing. Recirculation freeze protection can be provided by the Recirculation feature in the controller. An Open Loop Water Heating System provides many advantages. It is the simplest and typically the least expensive active system to install. There is no heat exchanger, which allows efficient heat transfer directly to the water. The system operates at standard line pressure. It is simple to add capacity to the system if demand changes. The system integrates easily with existing systems. The main components of (with two coils) Flat split Solar hot Water heating: 1) JINYI Flat plate Solar collector 2) Solar Workstation including: Circulation pump, Check valve, JINYI intelligent solar controller with sensors rass connector 3) Solar pressurized tank (with two coils) from **0L to **0L